TRENDnet User’s Guide

TEW-691GR

3.Under the Device Name Settings section, in the Device Name field, enter the new device name to show up on your network as reference to the router.

4.To save changes, click Apply.

Change your router URL

Administrator > Management

1.Log into your router management page (see “Access your router management page” on page 24).

2.Click on Administrator, and click on Management.

3.Under the Device URL Setting section, in the Device URL field, enter the URL to be used on the device. This can be used to easily access the router’s management page without knowing the IP address of the router

4.To save changes, click Apply.

Manually configure your Internet connection

Network > WAN Setting

1.Log into your router management page (see “Access your router management page” on page 24).

2.Click on Network, and click on WAN Setting.

3.In the Connection Type drop-down list, click the type of Internet connection provided by your Internet Service Provider (ISP).

4.Complete the fields required by your ISP.

5.Complete the optional settings only if required by your ISP.

6.To save changes, click Apply.

Note: If you are unsure which Internet connection type you are using, please contact

your ISP. Note: If your ISP requires a host name to be specified, you can specify it under Main > LAN & DHCP Server, in the Host Name field. To save changes, click Apply at bottom of the page.

Clone a MAC address

Network > WAN Setting

On any home network, each network device has a unique MAC (Media Access Control) address. Some ISPs register the MAC address of the device (usually a router or a computer) connected directly to the modem. If your computer MAC address is already registered with your ISP and to prevent the re-provisioning and registration process of a new MAC address with your ISP, then you can clone the address (assign the registered MAC address of your previous device to your new router). If you want to use the MAC address from the previous device (computer or old router that directly connected to the modem, you should first determine the MAC address of the device or computer and manually enter it into your router using the clone MAC address feature.

Note: For many ISPs that provide dynamic IP addresses automatically, typically, the stored MAC address in the modem is reset each time you restart the modem. If you are installing this router for the first time, turn your modem before connecting the router to your modem. To clear your modem stored MAC address, typically the procedure is to disconnect power from the modem for approximately one minute, then reconnect the power. For more details on this procedure, refer to your modem’s User Guide/Manual or contact your ISP.

© Copyright 2012 TRENDnet. All Rights Reserved.

26

Page 26
Image 26
TRENDnet TEW691GR manual Change your router URL, Manually configure your Internet connection, Clone a MAC address