TRENDnet User’s Guide
•Password: This is the password to gain access to Dynamic DNS service (NOT your router or wireless network password) for which you have signed up to.
5.To save changes, click Apply.
Allow remote access to your router management page
Management > Remote Management
You may want to make changes to your router from a remote location such at your office or another location while away from your home.
1.Log into your router management page (see “Access your router management page” on page 24).
2.Click on Administrator, and click on Management.
3.On the Remote Management section, select Enabled in the Remote Control setting.
•Port– It is recommended to leave this setting as 8080.
Note: If you have configured port 8080 for another configuration section such as virtual server or special application, please change the port to use. (Recommended port range
4. To save changes, click Apply.
TEW-691GR
Router Maintenance & Monitoring
Reset your router to factory defaults
Administrator > Settings Management
You may want to reset your router to factory defaults if you are encountering difficulties with your router and have attempted all other troubleshooting. Before you reset your router to defaults, if possible, you should backup your router configuration first, see “Backup and restore your router configuration settings” on page 40.
There are two methods that can be used to reset your router to factory defaults.
•Reset Button – Located on the side panel of your router, see “Product Hardware Features” on page 5 . Use this method if you are encountering difficulties with accessing your router management page.
OR
•Router Management Page
1.Log into your router management page (see “Access your router management page” on page 24).
2.Click on Administrator and click on Settings Management.
3.Under Load Factory Default, click Load Default. When prompted to confirm this action, click OK.
© Copyright 2012 TRENDnet. All Rights Reserved.
39