Lexmark 901, 90T9251, 90E, 90T9250, 90T9200, 91E, Pro915 manual Loading paper and original documents

Loading paper and original documents		35
	Load up to	Make sure
	50 transparencies	• The rough side of the transparencies faces down.
		• You load letter‑ or A4‑size transparencies.
		• You remove any paper backing sheets from the transparencies before
		loading.
		• If the transparencies have a removable strip, then each strip faces down.
		• The paper guides rest against the left, right, and bottom edges of the
		transparencies.
		Note: Transparencies require more drying time. Remove each transparency
		as it exits, and allow it to dry to avoid ink smudging.
	10 iron-on transfers	• You follow the loading instructions that came with the iron-on transfers.
		• The print side of the transfers faces down.
		• The paper guides rest against the edges of the transfers.
		Note: For best results, load transfers one at a time.
	25 index cards, photo papers, or postcards	• The thickness does not exceed 0.025 inches (0.635 mm).
		• The print side of the photo paper faces down.
		• You load the photo paper in the center of the tray, as indicated by the
		4 x 6‑inch photo paper outline.
		• The paper guides rest against the left, right, and bottom edges of the
		paper.

Note: For best results, allow photos to dry at least 24 hours before stacking, displaying, or storing.