Cabletron Systems 9H42X-XX manual Frame Size Bytes Packets

Page 77

Statistics

Fragments

Indicates the number of packets processed by the

 

network segment that were undersized (less than 64

 

bytes in length; a runt packet) and had either a

 

non-integral number of bytes (alignment error) or a bad

 

frame check sequence (CRC error).

Jabbers

Indicates the number of packets processed by the

 

network segment that were oversized (greater than 1518

 

bytes; a giant packet) and had either a non-integral

 

number of bytes (alignment error) or a bad frame check

 

sequence (CRC error).

Collisions

Indicates the total number of receive (those the device

 

detects while receiving a transmission) and transmit

 

(those the device detects while transmitting) collisions

 

detected on the network segment.

Undersized

Indicates the number of packets processed by the

 

network segment that contained fewer than 64 bytes

 

(runt packets) but were otherwise well-formed.

Oversized

Indicates the number of packets processed by the

 

network segment that contained more than 1518 bytes

 

(giant packets) but were otherwise well-formed.

In their default state, the percentages displayed to the right of the numerical values for these fields indicate what percentage of total packets transmitted on the network segment were of the noted type. If you select the % of Tot. Errors option by clicking the mouse button in the check box, the percentages will indicate what percentage of problem, or error, packets transmitted on the network segment were of the noted type; these percentages will add up to 100. (The % of Tot. Errors option is active if there is an X in the check box.) The pie chart in the center of the window provides a graphical view of the selected percentage breakdown; colors in the pie chart correspond to colors in the percentage display boxes. Values listed to the right of the pie chart indicate peak delta values recorded since the statistics screen was launched, and the date and time they occurred.

Frame Size (Bytes) Packets

The Frame Size (Bytes) Packets fields indicate the number of packets (including error packets) processed by the network segment that were of the noted length, excluding framing bits but including frame check sequence bits. Packet sizes counted are:

64

65-127

128-255

256-511

512-1023

1024-1518

4-4

RMON Statistics

Image 77
Contents Cabletron Systems Virus Disclaimer Page Restricted Rights Notice Page Contents Chapter Bridging Chapter StatisticsIndex Contents Viii Introduction Introduction Using the 9H42x-xx User’s Guide Common 9H42x-xx Window Fields Related ManualsSoftware Conventions IP Address Device NameLocation MAC AddressGetting Help Using ButtonsUsing On-line Help Getting Help from Cabletron Systems’ Global Call Center 9H42x-xx FirmwareIntroduction 9H42x-xx Firmware From an individual device icon 9H42x-xx Module ViewFrom the MMAC-Plus Chassis View Viewing Module InformationConnection Status Front Panel InformationUp Time Port StatusMenu Structure Boot PromFirmware TimeDevice Menu H42x-xx Module View Menu StructureUtilities Menu Port Status MenuBridge Menu Help MenuPort Menu Port Status DisplaysStatus Selecting a Port Status ViewMapping ErrorsLoad Speed Chassis Manager WindowType Port Status Color CodesChassis Manager Window To view the Chassis Manager window Viewing the Device TypeIndex Viewing I/F Summary InformationUpTime Sta DescriptionInterface Performance Statistics/Bar Graphs Raw CountsRate Address Viewing Interface DetailUnicast ErrorNon-Unicast DiscardedMaking Sense of Detail Statistics Using the Find Source Address FeaturePackets Transmitted Transmit only Configuring Ports Managing the ModuleFull Duplex Standard ModeConfiguring Standard Ethernet Ports Fast Ethernet Configuration Configuring Fast Ethernet PortsDesired Operational Mode Current Operational ModePort Type Link StateRemote Capabilities Advertised AbilitiesSetting the Desired Operational Mode 10. Edit Time Window Setting the Device Date and Time11. Edit Date Window Enabling and Disabling PortsTo enable or disable bridging for an individual interface 9H42x-xx Module View Managing the Module About Rmon Alarms and Events Alarm ConfigurationAlarm Configuration Basic Alarm ConfigurationRmon Basic Alarm Configuration Window Accessing the Basic Alarm Configuration WindowKilobits Total Errors Broadcasts/Multicasts Viewing Alarm StatusPort Number If NumberPolling Interval Log/TrapRising Threshold Rising ActionCreating and Editing a Basic Alarm Alarm Configuration Alarm Configuration Viewing the Basic Alarm Log Disabling a Basic AlarmAlarm Configuration Accessing the Rmon Advanced Alarm/Event List Advanced Alarm ConfigurationAlarm Configuration Such as the Hosts component, not present, or Rmon Create/Edit Alarms Window Creating and Editing an Advanced AlarmAlarm Configuration Alarm Configuration Alarm Configuration Table index.lengthin bytes.instancein decimal format Alarm Configuration Creating and Editing an Event Rmon Create/Edit Events Window Alarm Configuration Adding Actions to an Event Rmon Create/Edit Actions Window Or deleted use the button to update the table at any time Viewing an Advanced Alarm Event Log Deleting an Alarm, Event, or ActionHow Rising and Falling Thresholds Work Event Statistics Accessing the Statistics WindowsRmon Statistics Tot. ErrorsBytes ProblemsPackets Drop EventsFrame Size Bytes Packets Viewing Total, Delta, and Accumulated Statistics Printing Statistics Interface StatisticsInterface Statistics Window Unicast Bridging Basics BridgingMore on Transparent Bridging An Overview of Bridge ManagementBridge Status Window Spanning Tree State Interface Speed Interface TypeBridge Address Enabling and Disabling Bridging Enabling and Disabling All Installed InterfacesEnabling and Disabling Individual Interfaces From the Bridge Status windowPerformance Graphs Bridge StatisticsForwarded Green Filtered Magenta Total Errors RedXmitted Blue Configuring the Bridge Performance GraphsAltering the Ageing Time Using Source AddressingBridge Spanning Tree Bridge Spanning Tree Window Viewing Spanning Tree ParametersBridge Priority Bridge-level ParametersRoot Bridge Root CostProtocol Forwarding DelayHello Time Max AgePort-specific Parameters Designated Port Changing Bridge Spanning Tree ParametersTopology Changing Bridge PriorityChanging Max Age Time Changing the Spanning Tree Algorithm Protocol TypeChanging Hello Time Changing Path Cost Changing Forwarding Delay TimeChanging Port Priority Dynamic, or Learned Filtering DatabaseFiltering Database Window Number ListCapacity Ageing TimeSource Port Configuring the Filtering DatabaseReceive Port Port FilteringChanging the Receive Port Changing the Type of EntryAdding or Deleting Individual Entries Changing the Port Filtering ActionClearing All Permanent, Static, or Dynamic Entries Configuring Duplex ModesTo access the Duplex Modes window Bridging Bridging Configuring Duplex Modes Numerics IndexIndex-2 Index-3 Index Index-4

9H42X-XX specifications

Cabletron Systems 9H42X-XX is an advanced networking device recognized for its robust performance and reliability in various enterprise environments. Designed to meet the growing demands of data communication, this model serves as a vital component of network infrastructure, offering a myriad of features and technologies.

One of the standout characteristics of the 9H42X-XX is its high-speed data processing capabilities. Equipped with multiple Gigabit Ethernet ports, it ensures rapid data transfer rates, making it ideal for bandwidth-intensive applications. This model supports both IPv4 and IPv6 addressing, ensuring compatibility with modern networking standards and future-proofing the investment for organizations transitioning to newer technologies.

The 9H42X-XX excels in flexibility and scalability, accommodating a range of networking topologies. Its modular design allows for the addition of different interface cards, catering to specific networking requirements such as VoIP, video streaming, and cloud services. This adaptiveness is crucial for organizations that must optimize their network as needs evolve over time.

Security is a primary consideration in the design of the 9H42X-XX. With built-in firewall capabilities and support for advanced encryption protocols, data integrity and confidentiality are ensured. Furthermore, the device offers robust access control features, allowing organizations to define user permissions and protect sensitive information from unauthorized access.

Another important feature is the comprehensive management options available with the 9H42X-XX. It provides a user-friendly interface for network administrators to monitor traffic, configure settings, and troubleshoot issues. This ease of management contributes to reduced downtimes and better overall network efficiency.

Additionally, the Cabletron Systems 9H42X-XX is known for its durability and performance consistency in varying environmental conditions. This resilience makes it suitable for both indoor and outdoor deployments, further extending its usability across different types of organizations.

In summary, the Cabletron Systems 9H42X-XX is a versatile networking solution that combines high-speed connectivity, security features, and ease of management within its robust architecture. Its adaptability and technical specifications position it as a reliable choice for enterprises looking to upgrade their network infrastructure and accommodate future growth.