Installation
!
CAUTION
See the Cautions at the end of this table.
Table
Switch | Function | Description | |
|
|
| |
|
|
| |
| Clear | When toggled, this switch clears | |
8 | passwords stored in NVRAM, and restores the | ||
Password 1 | default passwords. Once reset you can use the | ||
| |||
|
| defaults or enter new passwords. | |
|
|
| |
|
| The module uses NVRAM to store user | |
|
| entered parameters such as IP addresses, | |
|
| device name, etc. To reset these parameters to | |
7 | Clear | the factory defaults, toggle this switch. Once | |
NVRAM 2 | reset you can use the defaults or enter new | ||
| |||
|
| parameters which are stored in NVRAM when | |
|
| the module is powered down, and remain | |
|
| there until the switch is toggled again. | |
|
|
| |
|
| Toggling this switch after pulling the board | |
|
| out of the | |
6 | Force BootP | information from NVRAM and forces image | |
Download | files to be downloaded from the station | ||
| |||
|
| configured to act as that modules’ BOOTP | |
|
| server. | |
|
|
| |
5 | Reserved | For Factory Use Only | |
|
|
| |
4 | Reserved | For Factory Use Only | |
|
|
| |
3 | Reserved | For Factory Use Only | |
|
|
| |
2 | Reserved | For Factory Use Only | |
|
|
| |
1 | Ring | Off= One ring of 24 ports (factory default) | |
Configuration | On = two rings of 12 ports each | ||
| |||
|
|
|
1.Caution: Do not toggle Switch 8 unless you intend to reset the user configured passwords to their factory default settings.
2.Caution: Do not toggle Switch 7 unless you intend to reset the user parameters to the factory default settings.