Cabletron Systems 9T122-24 manual Introduction, Features

Page 6

Chapter 1

Introduction

The 9T122-24 MicroLAN™ Switch Module, shown in Figure 1-1,is a three port Token Ring bridge and router module. This module supports either one token ring with twenty four HUB connections, or two separate Token Rings with twelve HUB connections, and an interface to the FNB backplane.

Features

Processor

The 9T122-24 is equipped with an advanced Intel i960 microprocessor. This microprocessor provides a platform for all management functions within a scalable RISC-based architecture.

System Management

Interfaces to the two System Management Buses (SMB-1 and SMB-10) for intermodule management.

Connectivity

The 9T122-24 provides twenty four RJ-45 Trunk Coupling Unit (TCU) lobe connectors. The connectors may be configured as one twenty four port ring (default) or two twelve ports rings.

Bridging/Routing

Bridging/Routing between the front panel Token Ring connections and/or to any other module in the chassis via FNB -1 or FNB -2 of the FNB bus. The module is capable of Transparent Bridging or Source Route Bridging. IEEE 802.1d Spanning Tree Protocol is supported in all bridging functions. Translational bridging between Source Routing and Transparent Frames types is also performed.

1-1

Image 6
Contents Page Page FCC Notice Vcci NoticeDOC Notice Contents Features IntroductionManagement Information Base MIB Support Features Related Manuals Getting HelpInstallation Installing the MicroLAN ModuleInstallation Reset Switch User Accessible Components SMB-1 PromSetting the Module Card DIP Switch Location of Module DIP SwitchSwitch Function Description Ring Speed Multi-Ring Out CapabilityOperation BridgingTransparent Bridging Spanning Tree Algorithm Flexible Network Bus FNB System Management BusesFNB Interface System Diagnostic ControllerDC/DC Converter I960 CoreLanview LEDs Lanview LEDsLED Color State Description LED Color State Yellow 16 Mbs Off Mps Safety ServiceSpecifications Physical Electrical