Cabletron Systems 7C04 Workgroup manual Mounting the 7C04 Chassis

Installation

2.2.2 Mounting the 7C04 Chassis

To mount the 7C04 Chassis in a standard 19-inch equipment rack, (Figure 2-2) use the following steps:

1.Slide the chassis into the equipment rack.

2.Align the holes on the chassis’ mounting brackets with the holes on the equipment rack.

3.Insert screws (provided with the equipment rack) into the desired holes of the mounting brackets.

4.Use a screwdriver to tighten each screw until the chassis is secured to the equipment rack.

Equipment Rack

MACADR	SN	1
		2	POWER IN
			POWER OUT
		SN
			OVERLOAD
			FANS
	SN	3
	SN	4

Power Supply Module

Mounting Bracket Mounting Bracket

Figure 2-2. A 7C04 Chassis mounted in an equipment rack

2-4