2 Installing and running the EZSwitchSetup wizard
If you are using an Ethernet LAN connection, a Discover Switch window is displayed (Figure 7). Proceed to “Discovering the switch.”
FIGURE 7 First Discover Switch window
Discovering the switch
1.Locate the WWN for your switch on the switch ID
2.From the Switch WWN list (Figure 7), choose the switch’s WWN prefix numbers and then enter the last six alphanumeric digits of your switch’s WWN. Each two alphanumeric digits must be separated by a colon.
3.Click Next.
When EZSwitchSetup discovers the switch, it displays the discovered IP addresses (IPv4 and IPv6), as shown in Figure 8.
If you are setting up the switch for the first time, the IP addresses are placeholder addresses that were assigned at the factory and you must provide valid addresses.
12 | EZSwitchSetup Administrator’s Guide |
|