Using the Menu System
The MVP 104GX menu system is accessed through the Menu and Next buttons while viewing the LCD panel display. See the previous Menu Flowchart section as a helpful guide while navigating the menu system. Use the chart below to reference the various flowchart arrows.
| 2 | press Menu button | press Next button | select <Manual> blanking | ||||
|
|
|
|
|
|
|
| and press Next button |
|
|
|
|
|
|
|
|
|
press Freeze and Next | press the Active window |
| ||||||
buttons simultaneously | selection button |
|
|
|
| |||
Figure 3-5 — MVP 104GX flowchart arrow designations
Default Cycle menu
After the initial power on of the MVP 104GX, the LCD displays a default cycle of two informational submenus, with each submenu appearing in
enabled Input selection button LEDs light green.
Product Name submenu
This submenu identifies the product name as the MVP 104GX. Press the Menu button to exit the Default Cycle menu and advance to the Picture Controls menu.
To adjust any active window’s sizing or positioning, press the appropriate Active window selection button.
Product Type submenu
Power
On
Extron
MVP 104GX
Multi Video Processor
This submenu describes the product type as a multi video processor. Press the Menu button to exit the Default Cycle menu and advance to the Picture Controls menu.
To adjust any active window’s sizing or positioning, press the appropriate Active window selection button.
Position/Size Window menu
While the MVP 104GX is in the Default Cycle menu, pressing the Active window selection button selects the Position/Size Window menu for the chosen window (#1, 2, 3, 4, or none). The active window can be sized and positioned either horizontally or vertically by viewing the active window and adjusting the appropriate knob, as indicated by the following illustrations.
Position/Size Window #1 – 4
MVP 104GX Operation |