Confirm Reset submenu
Confirm the menu system reset by first holding down the Freeze button, then press the Next button (the system advances to the System Resetting Please Wait submenu), or press the Next button to return to the Background Color submenu, or press the Menu button to exit the Confirm Reset submenu and proceed to the Genlock menu.
System Resetting Please Wait submenu
After 2 seconds, the menu system defaults to the Default Cycle menu.
Genlock menu
Press the Menu button to advance to the Exit menu, or press the Next button to proceed to the Horizontal Phase submenu.
Horizontal Phase submenu
The horizontal phase can be adjusted from 0 to 255 by rotating the Vertical sizing knob and observing the output display (the default is 128), or press the Next button to proceed to the Subcarrier Phase submenu, or press the Menu button to exit the horizontal phase and proceed to the Exit menu.
Subcarrier Phase submenu
The subcarrier phase can be adjusted from 0 to 255 by rotating the Vertical sizing knob and observing the output display (the default is 128), or press the Next button to return to the Horizontal Phase submenu, or press the Menu button to exit the Subcarrier Phase submenu and proceed to the Exit menu.
Genlock not detected
Horizontal Phase
000 – 255
Subcarrier Phase
000 – 255
Exit menu
Press the Next button to return to the Default Cycle menu, or press the Menu button to return to the Picture Controls menu.
Exit
Menu