Extron electronic HSA 200S, HSA 200CE, HSA 222S, HSA 222C Preparing the table with a router

Page 10

Installation, cont’d

Preparing the Table and Mounting the Enclosure

The preferred and recommended method for preparing the table is to use the appropriate Extron routing template and a router. See the part numbers for the templates in appendix A, “Reference Information”.

For an HSA 200C, HSA 200CE, or HSA 222C unit (US version only), another preferred method is to use a 6" hole saw.

Alternatively, for any model, you can use a paper cut-out template (see appendix A, “Reference Information”) and a sabre saw or keyhole saw, but this method is not recommended.

CAUTION

The opening in the table for the HSA enclosure

 

should be cut only by licensed and bonded

 

craftspeople. Exercise care to prevent scarring or

 

damaging the furniture.

 

The routing templates for the various HSA models

 

are not interchangeable. If you use the wrong

 

template, you will cut an improperly-sized hole. If

 

you use a larger template than required, the cut will

 

result in gaps in the table surface on either side of

 

the enclosure.

 

The surfaces of the HSA enclosure have screws and

 

other protruding hardware that could damage fine

 

furniture. Do not rest the enclosure on unprotected

 

furniture.

Preparing the table with a router

1.

Locate the desired mounting location on the tabletop or

 

other installation surface. Mark the location.

2.

Place the mounting template assembly on the table,

 

centered on the mounting location. Angle the template for

 

the optimum positioning. If necessary, use a square to

 

ensure that the template is properly positioned. Extron is

 

not responsible for improperly-positioned HSA products.

 

 

Ensure that only the wooden strips contact the

 

CAUTION

 

 

furniture. Failure to do so may mar the furniture.

3.

Once the template assembly is positioned properly, secure

 

the assembly to the table with clamps (figure 2-2).

Figure 2-2 — Cutting the opening with a router (example)

4.

Using a router with a 5/8" (or 16 mm) outside diameter

 

guide bushing and a 1/2" (or 12 mm or 12.7 mm)

 

diameter straight router bit, carefully cut the opening in

 

the table surface (figure 2-2).

 

 

 

 

Wear safety glasses when operating the router.

 

 

 

 

 

 

 

 

Failure to comply can result in eye injury.

5.

Remove the clamps and the routing template.

The routing template is reusable. Do not discard the template when the installation is complete. Save it to install other HSA products of the same size.

2-4

HSA 200/222 Series • Installation

HSA 200/222 Series • Installation

2-5

Page 9 Page 11
Image 10
Page 9 Page 11
Contents HSA 200S & HSA 200SE Precautions s Table of Contents One HSA 200/222 Series Surface Access ProductsTable of Contents, cont’d IntroductionAbout the Hideaway Surface Access Products IntroductionAll models FeaturesAbout the Extender board line driver HSA 200CE and HSA 200SE models onlyIntroduction HSA 200/222 Series Surface Access Products InstallationTwo Installation Overview InstallationPreparing the Routing Template Preparing the table with a router Installation, cont’d Installing the HSA enclosure allAll HSA 200 models only Underside Features and Cabling ConnectionsHSA 200C and HSA 200S no Extender board only All HSA 200 and HSA 222 models HSA 200CE and HSA 200SE Extender board onlyFront Panel Connectors Power connector wiring14 Audio input connector plug If the image does not appear or there is no sound Maintenance and ModificationsThree If the image is not displayed correctlyRemoving and Replacing the Enclosure Maintenance and ModificationsReplacing the Bezels Maintenance and Modifications, cont’d While youRemoving the front panel Servicing the HSA unit Ensure that AC power is disconnected beforeWhen the HSA 200 is upside-down, the latch may Be ineffective. If the latch releases in this positionFront access panel removal HSA 222 models Adjusting the Top Panel Replacing the gas lift, HSA 222 modelAAppendix a Reference InformationSpecifications Reference InformationReference Information, cont’d Surface cutout dimensions here before cutting a holeGeneral HSA Part Numbers HSA 200C/HSA 200CE international circular modelsReference Information, cont’d Included Parts AccessoriesTop Plate Dimensions Routing TemplatesAppendix B Packaging for ShipmentPackaging for Shipment Packaging for Shipment, cont’d Figure B-4 HSA unit suspended in the foam
Related manuals
Manual 30 pages 34.8 Kb Manual 2 pages 51.61 Kb Manual 3 pages 41.03 Kb

HSA 200SE, HSA 200S, HSA 222C, HSA 222S, HSA 200C specifications

The Extron HSA 222S is a highly advanced audio amplifier designed specifically for professional audio applications. As part of Extron's extensive range of audio solutions, the HSA 222S stands out for its robust features, innovative technologies, and user-friendly design, making it an ideal choice for educational institutions, corporate environments, and other venues requiring high-quality audio performance.

One of the most notable features of the HSA 222S is its powerful amplification capabilities. This amplifier delivers 20 watts per channel at 4 ohms, ensuring that audio signals can be reproduced with clarity and authority, even in larger spaces. The HSA 222S is designed with high-efficiency Class D amplification, which not only provides optimal power usage but also ensures low heat generation during operation, resulting in reliable performance throughout extended use.

The HSA 222S incorporates Extron's proprietary technologies, including the patented audio routing system that allows users to easily manage multiple audio sources. This flexibility assists in creating dynamic soundscapes and supports various audio applications. The amplifier also features advanced DSP options, enabling users to adjust equalization and fine-tune audio settings for diverse environments. This capability is particularly beneficial in venues that host multiple types of events, requiring adaptability in audio management.

Connectivity is another key characteristic of the HSA 222S. It is equipped with a range of input options, including line-level and microphone inputs, allowing seamless integration into existing audio infrastructures. With its balanced and unbalanced inputs, the HSA 222S can connect to a variety of audio devices, ensuring compatibility with numerous sound systems and configurations.

In addition to its outstanding performance and flexibility, the HSA 222S is designed for simplicity of use. Its intuitive front panel controls and informative LED indicators provide users with real-time feedback on system status, enabling easy adjustments as needed. Furthermore, Extron's extensive support and resources ensure that integrators can implement and maintain the HSA 222S efficiently.

Overall, the Extron HSA 222S is a powerful audio amplifier that combines cutting-edge technologies, versatility, and ease of use. With its capability to deliver superior sound quality while adapting to various audio demands, it serves as an essential component in modern audio-visual installations.
Top Page Image Contents