Extron electronic Extron HSA 200 Series Overview and Reference Guide

Page 25

Reference Information, cont’d

General

The Universal AC outlet is fully compatible with Europlug, British, Indian, Danish, and Italian plug types. See the Universal AC outlet guide on the Extron Web site, www.extron.com, for compatibility details on all plug types

Power (HSA 200SE/CE) Supplied by an external power supply External power supply (HSA 200SE/CE)

100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 0.42 A, regulated

Power input requirements (HSA 200SE/CE) 12 VDC, 0.2 A

Temperature/humidity — HSA 200SE/CE

 

 

Storage: -40 to +158°F (-40 to +70°C) / 10% to

 

 

90%, noncondensing

 

 

Operating: +32 to +122°F (0 to +50°C) / 10% to

 

 

90%, noncondensing

Rack mount

No, but furniture mountable

Enclosure type

............... Metal

Enclosure dimensions

 

 

Use the appropriate metal Extron routing template or refer to

CAUTION

 

 

 

the surface cutout dimensions here before cutting a hole in the

furniture or other surface. Pay special attention to the direction the unit will face; the unit’s connector access side is underlined. Extron is not responsible for miscut mounting holes.

HSA 200S, HSA 200SE — USA models

Top plate (outer rim)

6.470" W x 5.125" D

 

(16.43 cm W x 13.02 cm D)

Surface cutout (inside rim)

5.970 ±0.0325" W x 4.625 ±0.0325" D

 

(15.16 ±0.083 cm W x 11.75 ±0.083 cm D)

Top plate (inside tilt plate)

4.344" W x 3.000" D

 

(11.03 cm W x 7.62 cm D)

HSA 222S — USA model

 

Top plate (outer rim)

6.470" W x 5.125" D

 

(16.43 cm W x 13.02 cm D)

Surface cutout (inside rim)

5.970 ±0.0325" W x 4.625 ±0.0325" D

 

(15.16 ±0.083 cm W x 11.75 ±0.083 cm D)

Top plate (inside tilt plate)

4.660" W x 2.875" D

 

(11.84 cm W x 7.30 cm D)

HSA 200C, HSA 200CE — USA models

Top plate (outer rim)

6.500" diameter circle

 

(16.51 cm diameter) circle

Surface cutout (inside rim)

6.000 ±0.0325" diameter circle

 

(15.24 ±0.083 cm diameter) circle

Top plate (inside tilt plate)

4.344" W x 3.000" D

 

(11.03 cm W x 7.62 cm D)

HSA 222C — USA model

 

Top plate (outer rim)

6.500" diameter circle

 

(16.51 cm diameter) circle

Surface cutout (inside rim)

6.000 ±0.0325" diameter circle

 

(15.24 ±0.083 cm diameter) circle

Top plate (inside tilt plate)

4.660" W x 2.875" D

 

(11.84 cm W x 7.30 cm D)

HSA 200S, HSA 200SE, HSA 200C, HSA 200CE — USA models

Box (under surface)

4.0" H x 4.6" W (front of unit) x 4.4" D

 

(10.2 cm H x 11.7 cm W x 11.2 cm D)

 

without clamps

 

4.0" H x 8.0" W (front of unit) x 4.4" D

 

(10.2 cm H x 20.3 cm W x 11.2 cm D)

 

with clamps

HSA 222S, HSA 222C — USA models

Box (under surface)

5.6" H x 5.3" W (front of unit) x 3.6" D

 

(14.2 cm H x 13.5 cm W x 9.1 cm D)

 

without clamps

 

5.6" H x 8.6" W (front of unit) x 3.6" D

 

(14.2 cm H x 21.8 cm W x 9.1 cm D)

 

with clamps

HSA 200S/HSA 200SE — international square models

Top plate (outer rim)

8.183" W x 6.375" D

 

(20.79 cm W x 16.19 cm D)

Surface cutout (inside rim)

7.683 ±0.0325" W x 5.875 ±0.0325" D

 

 

(19.51 ±0.083 cm W x 14.92 ±0.083 cm D)

Top plate (inside tilt plate)

5.90" W x 4.10" D

 

 

(14.99 cm W x 10.41 cm D)

HSA 222S — international square models

Top plate (outer rim)

8.183" W x 6.375" D

 

(20.78 cm W x 16.19 cm D)

Surface cutout (inside rim)

7.683 ±0.0325" W x 5.875 ±0.0325" D

 

(19.51 ±0.083 cm W x 14.92 ±0.083 cm D)

Top plate (inside tilt plate)

6.183" W x 3.75" D

 

(15.70 cm W x 9.53 cm D)

A-4

HSA 200/222 Series • Reference Information

HSA 200/222 Series • Reference Information

A-5

Image 25
Contents HSA 200S & HSA 200SE Precautions s Table of Contents Table of Contents, cont’d HSA 200/222 Series Surface Access ProductsOne IntroductionIntroduction About the Hideaway Surface Access ProductsAbout the Extender board line driver FeaturesAll models HSA 200CE and HSA 200SE models onlyIntroduction HSA 200/222 Series Surface Access Products InstallationTwo Installation Overview InstallationPreparing the Routing Template Preparing the table with a router Installing the HSA enclosure all Installation, cont’dAll HSA 200 models only Underside Features and Cabling ConnectionsHSA 200C and HSA 200S no Extender board only HSA 200CE and HSA 200SE Extender board only All HSA 200 and HSA 222 modelsPower connector wiring Front Panel Connectors14 Audio input connector plug Three Maintenance and ModificationsIf the image does not appear or there is no sound If the image is not displayed correctlyRemoving and Replacing the Enclosure Maintenance and ModificationsReplacing the Bezels While you Maintenance and Modifications, cont’dRemoving the front panel When the HSA 200 is upside-down, the latch may Ensure that AC power is disconnected beforeServicing the HSA unit Be ineffective. If the latch releases in this positionFront access panel removal HSA 222 models Replacing the gas lift, HSA 222 model Adjusting the Top PanelReference Information AAppendix aReference Information SpecificationsReference Information, cont’d Surface cutout dimensions here before cutting a holeGeneral HSA 200C/HSA 200CE international circular models HSA Part NumbersTop Plate Dimensions AccessoriesReference Information, cont’d Included Parts Routing TemplatesPackaging for Shipment Appendix BPackaging for Shipment Figure B-4 HSA unit suspended in the foam Packaging for Shipment, cont’d
Related manuals
Manual 30 pages 34.8 Kb Manual 2 pages 51.61 Kb Manual 3 pages 41.03 Kb

HSA 200SE, HSA 200S, HSA 222C, HSA 222S, HSA 200C specifications

The Extron HSA 222S is a highly advanced audio amplifier designed specifically for professional audio applications. As part of Extron's extensive range of audio solutions, the HSA 222S stands out for its robust features, innovative technologies, and user-friendly design, making it an ideal choice for educational institutions, corporate environments, and other venues requiring high-quality audio performance.

One of the most notable features of the HSA 222S is its powerful amplification capabilities. This amplifier delivers 20 watts per channel at 4 ohms, ensuring that audio signals can be reproduced with clarity and authority, even in larger spaces. The HSA 222S is designed with high-efficiency Class D amplification, which not only provides optimal power usage but also ensures low heat generation during operation, resulting in reliable performance throughout extended use.

The HSA 222S incorporates Extron's proprietary technologies, including the patented audio routing system that allows users to easily manage multiple audio sources. This flexibility assists in creating dynamic soundscapes and supports various audio applications. The amplifier also features advanced DSP options, enabling users to adjust equalization and fine-tune audio settings for diverse environments. This capability is particularly beneficial in venues that host multiple types of events, requiring adaptability in audio management.

Connectivity is another key characteristic of the HSA 222S. It is equipped with a range of input options, including line-level and microphone inputs, allowing seamless integration into existing audio infrastructures. With its balanced and unbalanced inputs, the HSA 222S can connect to a variety of audio devices, ensuring compatibility with numerous sound systems and configurations.

In addition to its outstanding performance and flexibility, the HSA 222S is designed for simplicity of use. Its intuitive front panel controls and informative LED indicators provide users with real-time feedback on system status, enabling easy adjustments as needed. Furthermore, Extron's extensive support and resources ensure that integrators can implement and maintain the HSA 222S efficiently.

Overall, the Extron HSA 222S is a powerful audio amplifier that combines cutting-edge technologies, versatility, and ease of use. With its capability to deliver superior sound quality while adapting to various audio demands, it serves as an essential component in modern audio-visual installations.