Extron electronic HSA 200SE, HSA 200CE Installation, cont’d, Installing the HSA enclosure all

Page 11

Installation, cont’d

Preparing the table with a hole saw (HSA 200C, HSA 200CE, or HSA 222C—US version only)

1.

Locate the desired mounting location on the tabletop or

 

other installation surface. Mark the 6" circle, then find the

 

center and mark it as well.

 

 

 

 

 

Wear safety glasses when operating the hole saw.

 

 

 

 

 

 

 

 

 

Failure to comply can result in eye injury.

2.

Using a 6" hole saw on a portable drill, cut the mounting

 

hole at the desired location (figure 2-3). Extron is not

 

responsible for improperly positioned HSA products.

 

 

 

Use a portable drill with sufficient power for the 6"

 

CAUTION

 

 

 

 

 

 

hole saw. Exercise caution when handling the drill

 

 

 

 

 

and hole saw. Care should be taken to protect the

 

 

 

 

 

surface of the tabletop, podium, or other mounting

 

 

 

 

 

surface from damage.

2.

Remove the plastic strips that protect the corners of the

 

enclosure. If a sticky residue remains, remove it with an

 

appropriate metal cleaning product.

 

 

Do not use isopropyl alcohol or other solvents to clean

 

CAUTION

 

 

the HSA. Strong solvents will ruin some finishes.

3.

Carefully lower the HSA enclosure into the hole to test the

 

fit. If necessary, remove the enclosure and use a file or

 

rasp to enlarge or smooth the edges of the opening.

4.

From the underside of the table, reinstall the screw clamps

 

on the enclosure at a height at which the clamp will reach

 

the underside of the tabletop (figure 2-4).

Figure 2-4 shows an HSA 200 installation. Except for the video and audio connectors, the HSA 222 installation is identical.

Figure 2-3 — Cutting the opening with a hole saw

Installing the HSA enclosure (all)

1. Remove the screw clamps (2) on the sides of the enclosure.

CAUTION

The flanged edges of the top of the surface enclosure

 

are bevelled to an ultra-fine thickness of less than

 

0.04 (4/100)" (approximately 1 mm), and are

Power Cord

2 RJ-45 Connectors

Audio Cable (HSA 200 models only)

Extron

HSA 200

Hideaway Surface

Access Enclosure

Output BNC

Connectors

(HSA 200 models only)

Mounting

Surface

Screw Clamp

Display BNC

Connectors

(HSA 200 models only)

therefore very sharp. These edges are also soft and

may be easily nicked or bent. Exercise caution

when handling and mounting the enclosure.

Mishandling may result in injury to the installer or

damage the appearance of the enclosure.

Figure 2-4 — Mounting the HSA 200 or HSA 222 enclosure

2-6

HSA 200/222 Series • Installation

HSA 200/222 Series • Installation

2-7

Page 10 Page 12
Image 11
Page 10 Page 12
Contents HSA 200S & HSA 200SE Precautions s Table of Contents Introduction HSA 200/222 Series Surface Access ProductsTable of Contents, cont’d OneIntroduction About the Hideaway Surface Access ProductsHSA 200CE and HSA 200SE models only FeaturesAbout the Extender board line driver All modelsTwo InstallationIntroduction HSA 200/222 Series Surface Access Products Preparing the Routing Template InstallationInstallation Overview Preparing the table with a router Installing the HSA enclosure all Installation, cont’dHSA 200C and HSA 200S no Extender board only Underside Features and Cabling ConnectionsAll HSA 200 models only HSA 200CE and HSA 200SE Extender board only All HSA 200 and HSA 222 modelsPower connector wiring Front Panel Connectors14 Audio input connector plug If the image is not displayed correctly Maintenance and ModificationsThree If the image does not appear or there is no soundReplacing the Bezels Maintenance and ModificationsRemoving and Replacing the Enclosure While you Maintenance and Modifications, cont’dRemoving the front panel Be ineffective. If the latch releases in this position Ensure that AC power is disconnected beforeWhen the HSA 200 is upside-down, the latch may Servicing the HSA unitFront access panel removal HSA 222 models Replacing the gas lift, HSA 222 model Adjusting the Top PanelReference Information AAppendix aReference Information SpecificationsGeneral Surface cutout dimensions here before cutting a holeReference Information, cont’d HSA 200C/HSA 200CE international circular models HSA Part NumbersRouting Templates AccessoriesTop Plate Dimensions Reference Information, cont’d Included PartsPackaging for Shipment Appendix BPackaging for Shipment Figure B-4 HSA unit suspended in the foam Packaging for Shipment, cont’d
Related manuals
Manual 30 pages 34.8 Kb Manual 2 pages 51.61 Kb Manual 3 pages 41.03 Kb

HSA 200SE, HSA 200S, HSA 222C, HSA 222S, HSA 200C specifications

The Extron HSA 222S is a highly advanced audio amplifier designed specifically for professional audio applications. As part of Extron's extensive range of audio solutions, the HSA 222S stands out for its robust features, innovative technologies, and user-friendly design, making it an ideal choice for educational institutions, corporate environments, and other venues requiring high-quality audio performance.

One of the most notable features of the HSA 222S is its powerful amplification capabilities. This amplifier delivers 20 watts per channel at 4 ohms, ensuring that audio signals can be reproduced with clarity and authority, even in larger spaces. The HSA 222S is designed with high-efficiency Class D amplification, which not only provides optimal power usage but also ensures low heat generation during operation, resulting in reliable performance throughout extended use.

The HSA 222S incorporates Extron's proprietary technologies, including the patented audio routing system that allows users to easily manage multiple audio sources. This flexibility assists in creating dynamic soundscapes and supports various audio applications. The amplifier also features advanced DSP options, enabling users to adjust equalization and fine-tune audio settings for diverse environments. This capability is particularly beneficial in venues that host multiple types of events, requiring adaptability in audio management.

Connectivity is another key characteristic of the HSA 222S. It is equipped with a range of input options, including line-level and microphone inputs, allowing seamless integration into existing audio infrastructures. With its balanced and unbalanced inputs, the HSA 222S can connect to a variety of audio devices, ensuring compatibility with numerous sound systems and configurations.

In addition to its outstanding performance and flexibility, the HSA 222S is designed for simplicity of use. Its intuitive front panel controls and informative LED indicators provide users with real-time feedback on system status, enabling easy adjustments as needed. Furthermore, Extron's extensive support and resources ensure that integrators can implement and maintain the HSA 222S efficiently.

Overall, the Extron HSA 222S is a powerful audio amplifier that combines cutting-edge technologies, versatility, and ease of use. With its capability to deliver superior sound quality while adapting to various audio demands, it serves as an essential component in modern audio-visual installations.
Top Page Image Contents