Extron electronic IPL T SF24 Sending an e-mail alert through Telnet, Esc 4 SM, Managing files

Page 24

Communication and Control, cont’d

c.Click Save to keep changes to recipient e-mail addresses and file names.

CAUTION File names must end with an .eml extension.

Due to the 7 character limit for full file names, it’s advised that you use numeric titles (e.g., 1.eml, 24.eml). Numeric titles reduce the characters of the file name, and assist in keeping the alert files organized. However, alphabetical titles are permitted.

To finalize your new e-mail alerts within the Web server, do the following:

6.Obtain your gateway IP address from your system administrator.

7.Click System Settings on the menu on the left side of the window.

8.Within the System Settings screen (figure 4-10) place the gateway IP address into the Gateway IP Address field.

Sending an e-mail alert through Telnet

To complete the process of sending an e-mail alert, you must send it through a Telnet session and receive confirmation. To do so:

1.Open a Telnet session. For instructions on how to do this, see Accessing and using Telnet later in this chapter.

2.Use the “Send e-mail” SIS command to send the alert to the e-mail address of a numeric mailbox (see figure 4-15). Refer to the Command/response table for Simple Instruction Set (SIS) commands later in this chapter for specific command code.

For example, the code for sending an alert from the 4th numeric mailbox would be

Esc 4 SM

For detailed information on creating monitoring and scheduling scripts and software, see the Global Viewer Software User’s Guide.

Upgrading the firmware

Firmware upgrades will become available periodically, as improvements are made to the versatility and functionality of the IPL T interface. These upgrades will be available for download from the Internet.

CAUTION

The firmware file you select to upload must have

 

the extension “.S19”. Uploading the incorrect file

 

may cause your unit to stop working.

4-12 IPL T SF24 and IPL T SFI244 • Communication and Control

To upgrade the firmware:

1.Click Firmware Upgrade on the menu (on the left side of the window) and the Firmware Upgrade screen (figure 4-16) is displayed.

Figure 4-16 — Web server Firmware Upgrade screen

2.Click the Browse button to find the most current available version of the firmware.

If you find a later version than the one shown above the box, click Upload to upgrade to the newer version.

CAUTION

If you leave the page before upload is complete, the

 

upload will be cancelled.

Managing files

File Management is a useful tool that allows you to use and upload existing and custom Web pages. Custom pages can be developed using a third-party Web page development program such as FrontPage® or Dreamweaver®. File management also allows you to remove unnecessary or outdated files when they are no longer needed.

To add or update files:

1.Select the File Management tab and the File Management screen (figure 4-17) is displayed.

Figure 4-17 — Web server File Management screen

IPL T SF24 and IPL T SFI244 • Communication and Control

4-13

Page 23 Page 25
Image 24
Page 23 Page 25
Contents IP Link Tools USAPrecautions Extron’s WarrantyFCC Class a Notice Quick Start Guide IPL T SF24 and SFI244 Under Desk Projector MountTable of Contents Table of Contents, cont’d One IntroductionIPL T SF24 and SFI244 Features IntroductionAbout this Manual About the IPL T SF24 and SFI244 InterfacesInstallation and Operation Easily configured and controlledTwo Introduction, cont’dInstallation and Operation Installation OverviewIPL T SF24 and IPL T SFI244 Installation and Operation Mounting the IPL T InterfaceInstallation and Operation, cont’d Rear Panel Features and CablingPower Furniture or projector mountingEthernet/LAN Serial communicationFront panel indicators OperationIdentification Resetting the unit Connection and Configuration ThreeConnection and Configuration, cont’d Connecting the HardwareSerial connection Ethernet connectionConfiguring the Hardware PC configurationIPL T interface configuration Flex I/O connectionConfiguring the IPL T using direct PC connection Arp -s 10.13.170.15 00-05-A6-00-0A-90Ping Connection and Configuration, cont’d Firmware upgradesFour Communication and ControlCommunication and Control, cont’d Ports OverviewFlex I/O ports Digital inputBidirectional serial control interface ports Digital outputAnalog input Accessing and using the Web server Logon and system status Establishing or changing system or port settings Communication with the Interface Web server10 Web server System Settings screen Controlling IR devices or sending IR commands SFI244 onlySetting and changing your passwords Communication and Control, cont’dEditing and adding e-mail alerts Sending an e-mail alert through Telnet Esc 4 SMUpgrading the firmware Managing filesIR Learning SFI244 only Creating a driver with the IR Learner softwareUsing the command/response table Programmer’s Guide for the Telnet and Web browserSymbol definitions Password information Copyright information28 = Commands that may give E28 file not found Error responsesBidirectional Serial Data port Flex I/O Data portIP Setup Commands IR/Serial Data port SFI244 onlyFirmware Version/Part Number/Information File Commands Re-map port designationsWeb Browser Specific MailReset ZAP/Erase Commands Communication and Control, cont’d CustomizationServer side includes ControlQuery string Code examplesExample 26c Browser view 28a Html source code using a query string Href=index.html?cmd=W1*1*15*0irPlay/a 30b Browser viewURL encoding Reserved charactersUnsafe characters Direct port access ports 2001 through Communication and Control, cont’d Device ControlCustom Web pages Telnet PortTroubleshooting Power connectionsPort redirect Data connectionsSpecifications, Part Numbers Accessories AAppendix aSpecifications AppendixBB GlossaryParts Included partsGlossary GlossaryGlossary, cont’d
Top Page Image Contents