Remote Control, cont’d
Symbol definitions
= CR/LF (carriage return/line feed) (0x0D 0A)
•= space
X1 | = | Input number | 1 through maximum |
X2 | = | Input number | 0 through maximum (Input 0 |
|
|
| = deselect output) |
X3 | = | Output number | 1 or 2 |
X4 | = | Gain/attenuation value | |
X5 | = | Gain value (+dB) | Numeric value, 0 to 24dB |
X6 | = | Attenuation value | Numeric value, 1 to 18dB |
X9 | = | On or Off | 0 or 1 (0=Off and 1=On) |
| = | Software version | x.xx |
X19 |
ASCII to HEX Conversion Table |
• |
Command/response table for SIS commands
Additional description
ASCIICommand Response
Command
(host to switcher) (switcher to host)
Output switching
.X3
to output
andaudio videoX2
Tie input
ALLX2
INX3
OUT
!X3
*X2
Select video/audio input
Tie input 5 video and audio to output 2.
OUT2IN5 ALL
5*2!
Example:
.breakaway) (audioX3
tooutput videoX2
Tie input
VIDX2
INX3 OUT
%X3
*X2
Select video input only
.breakaway) (audioX3
tooutput audioX2
Tie input
AUDX3
INX2
OUT
$X3
*X2
Select audio input only
Note: Commands can be made back to back with no spaces.
Audio mute
.X3
Mute audio output
*1X3
AMT
*1Z/zX3
Audio mute
.X3
Unmute audio output
*0X3
AMT
*0Z/zX3
Audio unmute
. (0=off and 1=on)
X9
Audio mute
X9
Z/zX3
Read audio mute
audio | allaudio |
Muteall | Unmute |
AMT1 | AMT0 |
1*Z/z | 0*Z/z |
Audio unmute all
Audio mute all
Global
Video mute
X2
Video mute output
*1X2
Vmt
*1B/bX3
Video mute
X2
Video unmute output
*0X2
Vmt
*0B/bX3
Video unmute
(0=off and 1=on)
X9
Video mute
X9
B/bX3
Read Video mute
video | allvideo |
Muteall | Unmute |
Vmt1 | Vmt0 |
1*B/b | 0*B/b |
Video unmute all
Video mute all
Global
MMX 42/62 Series Matrix Switchers • Remote Control |