Extron electronic MMX 42 Installationtal ation, cont’d Installation Overview, Rack mounting

Page 9

Installationtal ation, cont’d

Installation Overview

To install and set up an Extron MMX 42/62 switcher for operation, follow these steps:

1Turn off all of the equipment. Ensure that the video sources and the output display are all turned off and disconnected from the power source.

2Mount the switcher. See Mounting the switcher in this chapter.

3Attach the cables. See Rear Panel Cabling in this chapter.

4Plug in the power supply, then turn on the display devices and the input devices.

5Set the audio gain and attenuation. See Remote Control in chapter 4.

Mounting the Switcher

Rack mounting

For optional rack mounting, mount the MMX switcher on the left or right side of a 19" 1U VersaTools Rack Shelf (Extron part #60-190-20) or Universal 1U Rack Shelf (Extron part #60-190-01) (figure 2-1).

VersaTools

Rack Shelf

Half Rack Width

False Front Face Plate

Use 2 mounting holes on

 

(2) 4-40 x 3/16" screws

 

opposite corners.

 

 

Figure 2-1 — Rack mounting the switcher

1.

If feet were previously installed on the bottom of the case,

 

remove them.

2.

Mount the switcher on the rack shelf, using two 4-40 x

 

3/16” screws in opposite (diagonal) corners to secure the

 

case to the shelf.

3.

If desired, attach a false front panel, or a second half-rack-

 

width device to the other side of the shelf.

4.

Attach the rack shelf to the rack using four 10-32 x ¾” bolts

 

and four #10 beveled dress washers.

Under-desk mounting

Mount the unit to a desk or podium using the optional mounting kit (Extron part #70-212-01) as follows:

1.

If rubber feet were previously installed on the bottom of the

 

unit, remove them.

2.

Attach the mounting brackets to the switcher with the

 

machine screws provided (figure 2-2).

3.

Hold the unit with the brackets attached against the

 

underside of the table or other furniture. Mark the location

 

of the screw holes of the bracket on the mounting surface.

OUTPUTS

 

 

1

 

 

2

1

INPUTS

 

2

 

 

3

 

 

4

 

 

C

 

 

ONFIG

 

 

V

 

 

IDEO

 

 

AUDIO

 

 

M

 

 

MX S

 

 

ER

 

 

IES

Figure 2-2 — Under-desk mounting the MMX

4.

Drill 3/32” (2 mm) diameter pilot holes, 1/4” (6.3 mm) deep

 

in the mounting surface at the marked screw locations.

5.

Insert #8 wood screws into the four pilot holes. Tighten each

 

screw into the mounting surface until just less than 1/4” (6.3

 

mm) of the screw head protrudes.

6.

Align the mounting screws with the slots in the brackets

 

and place the unit against the surface, with the screws

 

through the bracket slots.

2-2

MMX 42/62 Series Matrix Switchers • Installation

MMX 42/62 Series Matrix Switchers • Installation

2-3

Page 8 Page 10
Image 9
Page 8 Page 10
Contents USA Compact Matrix SwitchersFCC Class a Notice Extron’s WarrantyMMX 42/62 Series Matrix Switchers Quick Start Guide QS-1 InstallationQuick Start Guide MMX 42/62, cont’d Operation Quick Start Guide MMX 42/62, cont’dTable of Contents Table of Contents, cont’d OneIntroduction MMX 42/62 Series Matrix Switchers Introduction FeaturesComposite video AV models Video SV modelsTwo InstallationIntroduction, cont’d All modelsMounting the Switcher Installationtal ation, cont’d Installation OverviewMMX 42/62 Series Matrix Switchers Installation Rack mountingPower connection Installation, cont’dVideo signal input connections Rear Panel CablingVideo signal output connections Audio signal input connectionsAudio signal output connections Three OperationRS-232 connection Executive Mode Operationration, cont’d Front Panel Controls and IndicatorsFront Panel Operations MemoryOperation, cont’d System Reset Remote ControlTroubleshooting If no image appears FourSimple Instruction Set Control RemoteControl,cont’dRemote Control, cont’d Command/response table for SIS commandsAdditional description ASCIICommand Response Installing the software Remote Control, cont’d Windows-Based Program ControlUsing the software CommandMuting the audio signals Setting audio levelsInput selection Updating the firmware Executive modeSpecifications Accessories and Part Numbers Using the help systemAAppendix a Video Specificationscifications, cont’dSync AudioAccessories and Part Numbers, cont’d AccessoriesIncluded Parts Accessories and Part Numbers, cont’d Cables Super High Resolution Cable Part numberVideo Cable Part number
Related manuals
Manual 29 pages 9.09 Kb

MMX 42, MMX 62 specifications

Extron Electronics MMX 62 and MMX 42 are versatile AV switchers designed to cater to the needs of modern presentation environments. These products are renowned for their ability to simplify the connection and management of various audio and video sources, making them an essential addition to conference rooms, classrooms, and creative spaces.

The MMX 62 model is a six-input AV switcher, supporting a variety of video formats including HDMI, VGA, and composite video. It features two HDMI inputs that support both 4K resolutions and HDCP, ensuring compatibility with high-definition content. Meanwhile, the MMX 42 model offers a similar functionality with four inputs, enabling flexible connection options for devices in any presentation setting.

One of the standout features of the MMX series is its seamless integration of audio and video switching. Both models come equipped with built-in audio mixing capabilities, allowing users to manage audio sources directly from the switcher. This feature is highly beneficial for environments where multiple audio feeds need to be combined and routed to a common output, enhancing the overall user experience.

The switchers employ Extron’s advanced scaling technology, which provides high-quality output for various display resolutions. This capability ensures that presentations appear crisp and clear, regardless of the source material's resolution. Additionally, the MMX series supports 4K scaling, allowing users to present high-resolution content without loss of quality.

Another significant characteristic of the MMX 62 and MMX 42 is their intuitive user interface. Both devices are equipped with an easy-to-navigate front panel that allows for quick input selection and volume adjustment. Furthermore, optional control solutions, including Extron's GlobalViewer Enterprise and control systems, enable remote management and monitoring of the switchers, streamlining the overall operation.

In terms of connectivity, both models offer a range of outputs, including HDMI, balanced audio, and unbalanced audio outputs, allowing for flexible integration into existing systems. The support for HDCP compliance ensures that users can confidently manage protected content without interruptions.

Overall, Extron MMX 62 and MMX 42 provide robust performance, reliability, and convenience for AV professionals. With their array of features and technologies, they stand out as exceptional solutions for anyone looking to enhance their AV presentation capabilities.
Top Page Image Contents