Quick Start Guide — MMX 42/62
Installation
Step 1
Turn all of the equipment off and disconnect it from the power source.
VersaTools Rack Shelf
Step 2
Half Rack Width
False Front Face Plate
Select your mounting option, install the appropriate brackets and mount the switcher.
Otherwise, install the four rubber feet (included) and place the switcher on a desktop.
Use 2 mounting holes on opposite corners.
(2)
Step 3
Attach the video input cable(s). Using video inputs 1 through 4 (MMX 42) or 1 through 6 (MMX
62)attach video inputs to the switcher using connectors appropriate for your model (BNC or
Step 4
Attach the audio input cable(s). Using audio inputs 1 through 4 (MMX 42) or 1 through 6 (MMX 62), attach audio inputs to the switcher with connectors appropriate for your model (5- pole, captive screw or RCA - see illustrations below and right).
Step 5
Attach the video output cable(s).
Connect up to two video output devices to the switcher using
Tip (Signal)
Tip (+)
Sleeve (Gnd )
Sleeve ()
Tip
Sleeve
Tip
Sleeve
Unbalanced Input
(high impedance)
Tip
Ring
Sleeve (s)
Tip
Ring
Balanced Input
(high impedance)
600 ohms
Tip
Ring
Sleeve (s)
Tip
Ring
600ohms
Balanced Input
(600 ohms)
Right Channel
(Red Jacket)
Left Channel
(White Jacket)