Extron electronic MLS 406SA Using the help program, Key to file names, File name Description

Serial Communication, cont’d

8.When the firmware uploading is complete, a dialog box appears and asks you

•to exit the firmware update utility program if the new firmware loaded correctly (if the correct firmware version is displayed in the program window, as shown in the example below)

PRELIMINARY

or

•to run the utility again (perform step 5 of this procedure) if the firmware did not load correctly.

Follow the on-screen directions to complete the process.

NWhen you recycle power, power off the switcher for at least 4 seconds, then restore power.

Using the help program

For information on program features, press the F1 computer key, click on the Help menu from within the MediaLink control program, or select the MediaLnk Help icon in the Extron Electronics group or folder on your start menu.

For explanations of buttons or functions, click on the tabs in the help screen to reach the desired screen. Use a mouse or the Tab and Enter keys to select a button or function. A description and tips on using the program appears on screen.

Key to file names

File name	Description
________.MLK	User-saved MLC/MLC-MLS/MLS configuration file. This
	includes adjustments/settings. If the MLS is connected to an
	MLC (MediaLink Controller), the file also contains whatever
	driver (if any) was installed in the MLC 206 at the time the file
	was saved. See the MediaLink Controllers User’s Manual for
	details.
________.s19	Extron-supplied firmware update file. When the firmware
	is replaced, the switcher is also automatically reset to factory
	default settings.

4-14 MLS 304 Series, MLS 406Series • Serial Communication