Extron electronic MVX 128 manual X1* CY

Programmer’s Guide, cont’d

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description

View ties, gain, volume, mutes, and presets (continued)

View video global preset configuration

Command description:

Response description:

Example:

EX(*1*1VC}					X@1•X@2•...•X@16•Vid]											Show preset X(’s video
																configuration. Show the
																input tied to 16 sequential
																outputs (12 are present on
																this model), starting from
																output 1.
preset #*starting output # (O# - should always be 1)*1(=video)VC
input # (I#) tied to O#1•I# tied to O#2•I# tied to O#3• ... •I# tied to O#12•Vid]
		input 8 tied to output 4
input 12 tied to output 3								no tied input				outputs do not exist
Response = tied input: 08•08•12•08•08•11•00•00•--•--•--•--•--•--•--•--•Vid
Output:	1		2	3		4	5		6	7	8	09	10	11	12		13	14	15	16

View audio global preset configuration

Command description:

Response description:

Example:

Each position shown in the response is an output: left = output 1, right = output 16. (Outputs 9 through 16 are not present on the MVX 128 A.) The number in each position is the input tied to that output.

In this example, video input 8 is tied to outputs 1, 2, 4, and 5; input 12 is tied to output 3;

and input 11 is tied to output 6. No inputs are tied to outputs 7 and 8.

EX(*1*2VC} X@1•X@2•...•X@16•Aud] Show preset X(’s audio configuration. Show the input tied to 16 sequential outputs (12 are present on this model), starting from output 1.

preset #*starting output # (O# - should always be 1)*2(=audio)VC

input # (I#) tied to O#1•I# tied to O#2•I# tied to O#3• ... •I# tied to O#12•Aud]

input 1 tied to output 3 no tied input outputs do not exist

Response = tied input: 01•01•01•01•02•12•12•00•--•--•--•--•--•--•--•--•Aud

Output: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

Each position shown in the response is an output: left = output 1, right = output 16. (Outputs 9 through 16 are not present on the MVX 128 A.) The number in each position is the input tied to that output.

In this example, audio input 1 is tied to outputs 1, 2, 3, and 4; input 2 is tied to output 5, input 12 is tied to outputs 6 and 7. No input is tied to output 8.

Serial port configuration

Read port parameters	E1CP}	X1$,X1%,X1^,X1&]
Set mode	E1*X1*CY}	Cpn1•CtyX1*]
Read mode	E1CY}	X1*]

4-10 MVX 128 A VGA Matrix Switchers • Programmer’s Guide