Extron electronic MVX 88 Installationstallation, cont’d, Mounting the Switcher, Tabletop use

Page 12

Installationstallation, cont’d

Mounting the Switcher

Keep the switcher out of bright light to prevent interference with the IR signals from the IR 501 remote control.

Tabletop use

For tabletop use, affix one of the supplied self-adhesive rubber feet to each corner of the bottom of the switcher.

Rack mounting the switcher

All of the MVX Series VGA switcher models are housed in rack-mountable, 1U high, full rack wide metal enclosures. The appropriate rack mounting kit is included with each switcher. Rack mount the switcher as follows:

1.

If feet were previously installed on the bottom of the switcher, remove them.

2.

Attach the rack mount brackets to the switcher with the eight #8 machine

 

screws provided (figure 2-1).

Mounting Screws (2 Plcs)

Each Side

Rack-mount

Bracket (Included)

Drill pilot holes 3/32” (2 mm) dia., 1/4” (6 mm) deep.

or

1

2

#8 Screw (4 Plcs)

Table/

Wall-mount

Each Side

Bracket (Optional)

 

Figure 2-1 — Mounting the switcher

O

UTPUTS

3

1

4

2

 

7

 

8

 

5

INPUTS

6

3

 

4

A

 

 

 

 

VGA

 

 

 

 

88

 

 

 

 

MVX

 

R

 

 

 

 

L

7

 

 

 

 

R

 

 

 

R

L

8

 

 

L

5

 

 

 

R

 

 

 

R

L

6

 

 

L

3

 

 

 

R

 

 

 

 

7

1

R

L

4

 

L

R

 

UTS

 

2

 

 

 

L

 

 

OUTP

5

8

6

 

RS-232

3.

Insert the switcher into the rack, aligning the holes in the mounting bracket

 

with those of the rack.

4.

Secure the switcher to the rack using the supplied machine screws.

Furniture mounting the switcher

The MVX Series switchers can be mounted under a table or other horizontal surface with an optional Extron under-desk mounting kit (part #70-222-01).

1.

Secure the two table/wall mounting brackets to the switcher with the eight

 

machine screws provided in the kit (figure 2-1).

2.

Hold the switcher with attached brackets against the underside of the desk or

 

other furniture. Mark the location of holes for screws on the underside of the

 

desk.

2-2 MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Installation

Page 11 Page 13
Image 12
Page 11 Page 13
Contents VGA Matrix Switchers MVX 44 / 48 / 84 / 88 SeriesSafety Instructions English Consignes de Sécurité FrançaisSicherheitsanleitungen Deutsch Instrucciones de seguridad EspañolMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Quick Start QS-1 Connect up to 4 or 8 highIf desired, connect Control system orQuick Start MVX Series VGA Matrix Switchers, cont’d Table of Contents Table of Contents, cont’d One About the Switchers MVX 44 / 48 / 84 / 88 VGA Matrix Switchers IntroductionIntroductiontroduction, cont’d Features Any input to any or all outputsIntroduction, cont’d Two Installationstallation, cont’d Mounting the SwitcherRack mounting the switcher Furniture mounting the switcherSide of the furniture, where the switcher will be located Cabling and Rear Panel ViewsVideo and audio input connections Fasten it in placeInstallation, cont’d Video and audio output connectionsPower connection Remote connectionInstallation, cont’d Three Front Panel Controls and Indicators MVX 44 / 48 / 84 / 88 VGA Matrix Switchers OperationOperationeration, cont’d DefinitionsPower/audio/data LED and infrared sensor Input and output selection controls and indicatorsPower/data/audio LED Selection and audio/video controls and indicators Audio Setup buttonOperation, cont’d Control buttons and LEDsOn 4-output switchers, this button and LED stand alone Powering up the switcher OperationsCreating a set of ties Example 1 Create a set of video and audio ties Select video and audio for the tie figurePress and release the Input 5 button figure Select the outputs Press and release the Enter button figureExample 2 Add a video tie to a set of video and audio ties Select video only for the tie figurePress and release the Output 1 button figure Example 3 Remove a tie from a set of ties Select audio only for the tie figurePress and release the Output 4 button figure 15 Deselect the outputViewing the configuration Audio breakawayOut Example 4 View ties by selecting an input19 Select an input Press and release the I/O button figureExample 5 View ties by selecting outputs Press and release the Output 3 button figure24 Deselect audio to view video ties only Using presets Example 6 Save a presetExample 7 Recall a preset Preset 2 PresetAdjusting input audio gain and attenuation Press and release the Input 1 button figureMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Operation Example 8 Adjust the input audio gain = unlit, = blinking LED+2 dB Lit +dB or -dB LED indicates the gain + or attenuation34 Exit Audio Setup mode Resetting audio gain single inputResetting audio gain all inputs Setting the output audio levelPress and release the and buttons simultaneously figure Front panel security lockout Executive mode Clearing all ties and presetsResetting the system to factory defaults MemoryTroubleshooting Audio signalOptimizing the Audio Worksheets Worksheet example 1 System equipmentPodium monitor Conf. room Sound VCR system USP Worksheet example 2 Daily configuration 44 Worksheet example 2 Daily configurationWorksheet example 3 Test configuration 45 Worksheet example 3 Test configurationOperation, cont’d Configuration worksheet Output destinationsOperation, cont’d Four Host-to-Switcher instructions MVX 44 / 48 / 84 / 88 VGA Matrix Switchers Remote OperationRemoteOperation,cont’d Simple Instruction Set ControlSwitcher-initiated messages Switcher error responses Using the command/response tableSymbol definitions Remote Operation, cont’dCommand/response table for SIS commands Command Ascii Command Response Additional descriptionCommand/response table for SIS commands cont’d Global presets View ties, gain, mutes, and presets Loading firmware using an SIS command Settings Ascii SetupClick File Properties Depress the keyboard’s EscClick the Files of type drop box and select All files File figureMatrix Switchers Control Program Installing the softwareUsing the software OverviewExtron Matrix Switchers Control Program window blank Sample program window complete Updating the firmware Open windowMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Remote Operation Windows buttons, drop boxes, and trash Windows menusFile menu 11 RGB Delay/Mute/Output-Volume Adjust window Tools menu13 Ties shown as lines 14 Ties shown as crosspoints Using Emulation mode 15 Emulation mode configurationUsing the help system Remote Operation, cont’d AAppendix a SpecificationsandandPartPartNumbers,Numberscont’d SpecificationsSync Specifications and Part Numbers, cont’d Audio outputMVX Series VGA switchers Optional accessoriesPart Numbers Included partsInstall kits Part Cable assemblies PartVGA to BNC cable assemblies Part Audio cable assemblies PartFCC Class a Notice Extron’s Warranty Asia JapanExtron Electronics, USA
Related manuals
Manual 70 pages 45.03 Kb

MVX 48, MVX 84, MVX 44, MVX 88 specifications

Extron Electronics is a prominent leader in high-quality AV technology solutions, renowned for its innovative product lines designed to address diverse connectivity and distribution needs. Among their array of offerings, the MVX series stands out, particularly the MVX 44, MVX 84, and MVX 88 models, which cater to various AV signal routing needs within educational institutions, corporate environments, and large spaces.

The Extron MVX 44 is a 4x4 matrix switcher designed for routing HDMI, VGA, and audio signals. One of its key features is its ability to deliver high-resolution video up to 1080p, making it ideal for modern multimedia presentations. The MVX 44 supports EDID management, ensures compatibility with a range of source devices, and features automatic switching capabilities. It also includes a user-friendly interface for seamless operation, allowing simultaneous switching of multiple input sources to multiple outputs.

Expanding on the capabilities of the MVX 44, the MVX 84 and MVX 88 models provide enhanced functionality with additional inputs and outputs. The MVX 84 offers support for up to 8 input sources and 4 output destinations, while the MVX 88 offers 8x8 routing of signals. Both models maintain superior video quality and high-performance signal processing, accommodating more extensive AV systems. They also share features such as HDCP compliance to secure content protection, ensuring that the highest quality video signals are transmitted without degradation.

Technologically advanced, these switchers incorporate Extron's exclusive technologies, such as the Advanced Color Processing for superior color fidelity and signal reliability. Additionally, the Series comes equipped with optional control and integration capabilities, enabling connection to various AV control systems for centralized management.

The Extron MVX series matrices are built with the robustness expected from Extron products, ensuring long-term reliability in demanding environments. The integration of state-of-the-art support for audio signals allows not only video but also audio distribution, making them versatile for any AV setup. In summary, with their rich feature set, impressive scalability, and superior video processing capabilities, the Extron MVX 44, MVX 84, and MVX 88 present compelling solutions for anyone looking to streamline AV signal management in professional setups.
Top Page Image Contents