Extron electronic MVX 48, MVX 88, MVX 44 Specifications and Part Numbers, cont’d, Audio output

Page 74

Specifications and Part Numbers, cont’d

Audio output

Output gain

0 dB unbalanced (Consumer) or +12 dB balanced (Pro), selectable;

 

default = +12 dB, balanced, when output level is set to “Pro”

Number/signal type

 

MVX 44/84 VGA A

4 stereo, balanced/unbalanced

MVX 48/88 VGA A

8 stereo, balanced/unbalanced

Connectors

 

MVX 44/84 VGA A

(4) 3.5 mm captive screw connectors, 5 pole

MVX 48/88 VGA A

(8) 3.5 mm captive screw connectors, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±0.1 dB channel to channel

Nominal level

+4 dBu (1.23 V) (default) balanced (Pro), or

 

-10 dBV (316 mV) unbalanced (Consumer), selectable

Maximum level (Hi-Z)

>+22 dBu, balanced; >+14 dBV, unbalanced at 1%THD+N at default settings

Maximum level (600 ohm)

>+20 dBu, balanced; >+12 dBV unbalanced at 1%THD+N at default settings

Control/remote — switcher

Serial control port

RS-232, 9-pin female D connector

Baud rate and protocol

9600, 8-bit, 1 stop bit, no parity

Control pin configurations

2 = TX, 3 = RX, 5 = GND, 9 = hardwired IR input

IR controller module

IR 501 (optional remote control)

Program control

Extron’s control/configuration program for Windows®

 

Extron’s Simple Instruction Set (SIS™)

General

Power

100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal, autoswitchable

Temperature/humidity

Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing

 

Operating +32° to +122°F (0° to +50°C) / 10% to 90%, noncondensing

Rack mount

Yes, with included brackets, part #70-077-03, or furniture mountable with an

 

optional under-desk mounting bracket, part #70-222-01.

Enclosure type

Metal

Enclosure dimensions

1.75" H x 17.4" W x 8.5" D (1U high, full rack wide)

 

4.4 cm H x 44.2 cm W x 21.6 cm D

 

(Depth excludes connectors and knobs. Width excludes rack ears.)

Product weight

7.0 lbs (3.2 kg)

Shipping weight

10 lbs (5 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Listings

UL, CUL

Compliances

CE, FCC Class A, VCCI, AS/NZS, ICES

MTBF

30,000 hours

Warranty

3 years parts and labor

All nominal levels are at ±10%

Specifications are subject to change without notice.

A-4 MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Specifications and Part Numbers

Page 73 Page 75
Image 74
Page 73 Page 75
Contents VGA Matrix Switchers MVX 44 / 48 / 84 / 88 SeriesSicherheitsanleitungen Deutsch Safety Instructions EnglishConsignes de Sécurité Français Instrucciones de seguridad EspañolIf desired, connect MVX 44 / 48 / 84 / 88 VGA Matrix Switchers Quick Start QS-1Connect up to 4 or 8 high Control system orQuick Start MVX Series VGA Matrix Switchers, cont’d Table of Contents Table of Contents, cont’d One Introductiontroduction, cont’d About the SwitchersMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Introduction Features Any input to any or all outputsIntroduction, cont’d Two Rack mounting the switcher Installationstallation, cont’dMounting the Switcher Furniture mounting the switcherVideo and audio input connections Side of the furniture, where the switcher will be locatedCabling and Rear Panel Views Fasten it in placeInstallation, cont’d Video and audio output connectionsPower connection Remote connectionInstallation, cont’d Three Operationeration, cont’d Front Panel Controls and IndicatorsMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Operation DefinitionsPower/data/audio LED Power/audio/data LED and infrared sensorInput and output selection controls and indicators Operation, cont’d Selection and audio/video controls and indicatorsAudio Setup button Control buttons and LEDsOn 4-output switchers, this button and LED stand alone Creating a set of ties Powering up the switcherOperations Press and release the Input 5 button figure Example 1 Create a set of video and audio tiesSelect video and audio for the tie figure Select the outputs Press and release the Enter button figurePress and release the Output 1 button figure Example 2 Add a video tie to a set of video and audio tiesSelect video only for the tie figure Example 3 Remove a tie from a set of ties Select audio only for the tie figurePress and release the Output 4 button figure 15 Deselect the outputOut Viewing the configurationAudio breakaway Example 4 View ties by selecting an input19 Select an input Press and release the I/O button figureExample 5 View ties by selecting outputs Press and release the Output 3 button figure24 Deselect audio to view video ties only Using presets Example 6 Save a presetExample 7 Recall a preset Preset 2 PresetAdjusting input audio gain and attenuation Press and release the Input 1 button figureMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Operation Example 8 Adjust the input audio gain = unlit, = blinking LED+2 dB Lit +dB or -dB LED indicates the gain + or attenuation34 Exit Audio Setup mode Resetting audio gain single inputPress and release the and buttons simultaneously figure Resetting audio gain all inputsSetting the output audio level Front panel security lockout Executive mode Clearing all ties and presetsResetting the system to factory defaults MemoryOptimizing the Audio TroubleshootingAudio signal Podium monitor Conf. room Sound VCR system USP WorksheetsWorksheet example 1 System equipment Worksheet example 2 Daily configuration 44 Worksheet example 2 Daily configurationWorksheet example 3 Test configuration 45 Worksheet example 3 Test configurationOperation, cont’d Configuration worksheet Output destinationsOperation, cont’d Four RemoteOperation,cont’d Host-to-Switcher instructionsMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Remote Operation Simple Instruction Set ControlSwitcher-initiated messages Symbol definitions Switcher error responsesUsing the command/response table Remote Operation, cont’dCommand/response table for SIS commands Command Ascii Command Response Additional descriptionCommand/response table for SIS commands cont’d Global presets View ties, gain, mutes, and presets Click File Properties Loading firmware using an SIS commandSettings Ascii Setup Depress the keyboard’s EscClick the Files of type drop box and select All files File figureUsing the software Matrix Switchers Control ProgramInstalling the software OverviewExtron Matrix Switchers Control Program window blank Sample program window complete Updating the firmware Open windowMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Remote Operation File menu Windows buttons, drop boxes, and trashWindows menus 11 RGB Delay/Mute/Output-Volume Adjust window Tools menu13 Ties shown as lines 14 Ties shown as crosspoints Using Emulation mode 15 Emulation mode configurationUsing the help system Remote Operation, cont’d AAppendix a SpecificationsandandPartPartNumbers,Numberscont’d SpecificationsSync Specifications and Part Numbers, cont’d Audio outputPart Numbers MVX Series VGA switchersOptional accessories Included partsVGA to BNC cable assemblies Part Install kits PartCable assemblies Part Audio cable assemblies PartFCC Class a Notice Extron’s Warranty Asia JapanExtron Electronics, USA
Related manuals
Manual 70 pages 45.03 Kb

MVX 48, MVX 84, MVX 44, MVX 88 specifications

Extron Electronics is a prominent leader in high-quality AV technology solutions, renowned for its innovative product lines designed to address diverse connectivity and distribution needs. Among their array of offerings, the MVX series stands out, particularly the MVX 44, MVX 84, and MVX 88 models, which cater to various AV signal routing needs within educational institutions, corporate environments, and large spaces.

The Extron MVX 44 is a 4x4 matrix switcher designed for routing HDMI, VGA, and audio signals. One of its key features is its ability to deliver high-resolution video up to 1080p, making it ideal for modern multimedia presentations. The MVX 44 supports EDID management, ensures compatibility with a range of source devices, and features automatic switching capabilities. It also includes a user-friendly interface for seamless operation, allowing simultaneous switching of multiple input sources to multiple outputs.

Expanding on the capabilities of the MVX 44, the MVX 84 and MVX 88 models provide enhanced functionality with additional inputs and outputs. The MVX 84 offers support for up to 8 input sources and 4 output destinations, while the MVX 88 offers 8x8 routing of signals. Both models maintain superior video quality and high-performance signal processing, accommodating more extensive AV systems. They also share features such as HDCP compliance to secure content protection, ensuring that the highest quality video signals are transmitted without degradation.

Technologically advanced, these switchers incorporate Extron's exclusive technologies, such as the Advanced Color Processing for superior color fidelity and signal reliability. Additionally, the Series comes equipped with optional control and integration capabilities, enabling connection to various AV control systems for centralized management.

The Extron MVX series matrices are built with the robustness expected from Extron products, ensuring long-term reliability in demanding environments. The integration of state-of-the-art support for audio signals allows not only video but also audio distribution, making them versatile for any AV setup. In summary, with their rich feature set, impressive scalability, and superior video processing capabilities, the Extron MVX 44, MVX 84, and MVX 88 present compelling solutions for anyone looking to streamline AV signal management in professional setups.
Top Page Image Contents