Extron electronic DMS 3600, DMS 2000 Command and Response Table for SIS Commands, Create ties

DMS 1600,

Command and Response Table for SIS Commands

Command	ASCII Command	Response	Additional Description
	(Host to Unit)	(Unit to Host)

NOTES:

•Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%.

•The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).

Create ties

NOTES:

•The ! tie command, the & tie command, and the % tie command can be used interchangeably.

•The ! read tie command, & read tie command, and the % read tie command can be used interchangeably.

DMS 2000, DMS 3200, DMS 3600 •

Tie input X! to output X@	X!*X@!
Example (see Notes, above):	1*3!
Tie input X! to output X@	X!*X@&
Example (see Notes, above):	10*4&
Tie input X! to output X@	X!*X@%
Example (see Notes, above):	7*5%
Read output tie	X@&
Read output tie	X@%
Read output tie	X@!

OutX@•InX!•All]	Tie input X! to output X@.
Out03•In01•All]	Tie input 1 to output 3.
OutX@•InX!•RGB]	Tie input X! to output X@.
Out04•In10•RGB]	Tie input 10 to output 4.
OutX@•InX!•Vid]	Tie input X! to output X@.
Out05•In07•Vid]	Tie input 7 to output 5.
X!]	Input X! is tied to output X@.
X!]	Input X! is tied to output X@.
X!]	Input X! is tied to output X@.

Remote Control 15

NOTE: • = Space
X! = Input number	00	– maximum number of inputs for your configuration (00 = untied)
X@ = Output number	01	– maximum number of outputs for your configuration