Extron electronic Removing and Installing a Fan DMS 1600 and DMS, Remove and Install a Fan

Page 22

3.Slide the power supply out of the chassis.

4.Orient the power supply module to be installed with the LED to the right.

5. Align the flanges on the power supply module with the left and right power supply guides.

2.Rotate the top and bottom knurled knobs to completely loosen the captive screws (see figure 16).

6.Gently slide the power supply module into the enclosure until the power supply meets resistance.

7.Gently seat the power supply in the backplane.

8.Use a screwdriver to tighten the left and right knurled knobs to lock the power supply in place.

Removing and Installing a Fan (DMS 1600 and DMS 3600)

The DMS 1600 has a single fan module. The DMS 3600 has two identical fan modules. If a fan fails, it should be replaced at the earliest opportunity.

The fan modules are hot-swappable; you do not need to power down the switcher to install or remove either fan.

REMOTE RS-232/RS-422

RESETTRI-LEVELBI-LEVELSWITCH

LAN ACTLINK

REFERENCE

 

 

 

A

 

 

D

A

 

C

 

A

DVI-D

INPUTS

D

 

 

 

 

B

 

 

 

 

C

D

A

DVI-D

INPUTS

 

 

 

 

A

 

 

 

B

 

 

 

 

C

 

 

DVI-D

INPUTS

D

 

 

 

 

A

 

 

 

B

 

 

 

 

C

 

 

DVI-D

INPUTS

 

 

 

 

 

A

 

 

 

B

 

 

 

A

 

 

 

REDUNDANT

 

 

 

DISCONNECTBOTHPOWER CORDSBEFORESERVICING

PRIMARY

 

 

 

D

 

 

 

44 DVI

 

 

 

DMS

 

-D OUTPUTS

C

 

D

DVI

 

 

44 DVI

 

 

 

DMS

B

 

 

 

 

-D OUTPUTS

C

 

 

 

D

DVI

 

 

44 DVI

 

 

 

DMS

B

 

 

 

 

-D OUTPUTS

C

 

D

DVI

 

 

44 DVI

 

 

 

DMS

B

 

 

 

 

 

OUTPUTS

C

DVI-D

 

 

 

B

 

 

 

NOTE: DMS 2000 and DMS 3200 — The fans are fixed in place and are not field replaceable.

1.Remove and retain the two screws that secure the row identification plate (identifying the rows of the adjacent DVI input and output connectors) to the fan. Retain the plate.

Align the fan module edges with the plastic guides.

Figure 16. Remove and Install a Fan

 

1-8

 

CA

ANAHEIM,

9-16

 

17-24

 

25-32

Knurled

Knobs

3.Gently pull on the screws to loosen the fan from the backplane.

4.Slide the fan out of the chassis.

5.Orient the fan to be installed so that the printing on the back of the panel is right-side up.

6.Align the flanges on the fan with the top and bottom fan guides.

7.Gently slide the fan into the enclosure until the fan meets resistance.

8.Gently seat the fan in the backplane.

9.Use a screwdriver to tighten the top and bottom knurled knobs to lock the fan in place.

10.Secure the row identification plate to the fan.

32 DMS 1600, DMS 2000, DMS 3200, DMS 3600 • Maintenance and Modifications

DMS 1600, DMS 2000, DMS 3200, DMS 3600 • Maintenance and Modifications 33

Image 22
Contents DMS 1600, DMS DMS 3200, DMS FCC Class a Notice Safety InstructionsFDA/IEC 60825-1 Requirements Contents Introduction About this GuideConfigurability About the DMS Matrix SwitchersConfigurability rules Board Configuration Overview InstallationRear Panel DMS 1600 Features Making ConnectionsFront Panel Primary and Redundant Power Supply LEDs DMS 1600 and DMSComputer or control system connection Use a crossover cable Creating a Tie Front Panel OperationsViewing Ties and Muting Outputs Locking Out the Front Panel Executive Mode Remote ControlSaving or Recalling a Preset Selected SIS CommandsNumber of connections Host-to-Switcher InstructionsCommon SIS Command Symbols Establishing a USB Port ConnectionCommand and Response Table for SIS Commands Create ties# Edid values # value for DMS model Source # Edid values # value for DMS model Resolution1024x768 @ 60 Hz Save and recall presets Channel mute commandsInformation requests Command and Response Table for IP-Specific SIS Commands IP and serial port setupInstalling and Starting the Control Program Installing the ProgramFirst-time Connection Considerations Starting the ProgramAccessing the Html Pages Configuring for Network CommunicationLoading the Start-up Downloaded Start-upMaintenance Modifications Removing and Installing an I/O Board or Blank PanelRemove and Install an I/O Board Removing and Installing a Fan DMS 1600 and DMS Remove and Install a FanPage Extron Warranty Extron India

DMS 3200, DMS 3600, DMS 1600, DMS 2000 specifications

Extron Electronics has long been a leader in the field of audio-visual integration, and their DMS family of switchers showcases their commitment to quality and innovation. The DMS 2000, DMS 1600, DMS 3600, and DMS 3200 are modular AV switching solutions designed to meet the needs of various AV applications, enhancing flexibility and functionality in managing signals.

The DMS 2000 is known for its exceptional ability to support a wide range of input and output configurations, making it suitable for various environments, from classrooms to corporate boardrooms. One of its main features is its modular construction, allowing users to customize the unit with different input and output cards based on the specific requirements of a project. This flexibility is coupled with Extron's exceptional scaling technology, which ensures high-quality video signal processing across diverse sources.

The DMS 1600, though smaller in capacity, still offers impressive features aimed at efficient signal management. This model can handle multiple HDMI inputs and outputs, positioning it well for smaller AV setups or as a stepping stone for upgrading existing systems. Its built-in EDID and HDCP management simplify integration with modern display devices, making it easier for users to connect multiple sources without worrying about compatibility issues.

Meanwhile, the DMS 3600 brings enhanced capabilities, boasting higher capacities suitable for larger installations. This model supports extensive audio routing options and extensive control capabilities, making it ideal for complex AV systems where seamless integration is critical. The advanced control options include support for various control systems, allowing users to integrate the DMS 3600 with existing technology seamlessly.

Lastly, the DMS 3200 offers features that are particularly appealing for installations that require both AV signal management and advanced control functionalities. Its robust processing capabilities ensure that it can handle high-resolution video signals with minimal latency. Additionally, the DMS 3200 excels in audio capabilities, supporting various audio formats and providing a comprehensive audio management system.

Overall, the DMS family of products from Extron Electronics stands out due to their modularity, advanced scaling technologies, and exceptional signal management capabilities. These characteristics make them ideal for a diverse range of applications, from educational environments to corporate settings, where flexibility and high performance are paramount. Their commitment to innovation and quality continues to position Extron Electronics at the forefront of AV technology.