SW6 DVI a Plus Rear Panel | Extron electronic 68-1316-02 specification

POWER

12V

1.0A MAX

The following illustrations show the back panels of the SW6 and SW8 DVI A Plus models. The non-audio models of the SW6 and SW8 DVI Plus (not shown) have the same back panels as their audio counterparts, but without audio connectors (E and F).

			6				5
			DVI-D / AUDIO INPUTS			DVI-D / AUDIO OUTPUT		SW6 DVI A Plus
1	2	3	4	5	6	L	R
								REMOTE / AUTO-SW
								Tx Rx A S
			1				2	4

POWER

12V

1.0A MAX

Figure 7. SW6 DVI A Plus Rear Panel

DVI-D / AUDIO INPUTS

1	2	3	4	5	6	7	8

DVI-D / AUDIO OUTPUT		SW8 DVI A Plus
L	R

REMOTE	/ AUTO-SW
Tx Rx	A S

2 4

Figure 8. SW8 DVI A Plus Rear Panel

AVideo input connectors — Connect DVI-D video input devices to these female DVI-I connectors.

NOTES: • The connectors on the switcher rear panel are DVI-I. However, the switcher

accepts only single-link DVI-D signals.

• Appropriate DVI-D to HDMI cables or adapters are required for HDMI

signal input and output.

• The SW DVI Plus Series switchers are not compatible with HDCP signals.

For each of these inputs there is a DIP switch on the front panel to set the equalization level of the input, which compensates for weak or noisy signals (see “Front Panel Features” on page 12).

EDID information (display resolution, refresh rate, and pixel clock rate), when read from the output display or entered by a user, is written to memory on each input, allowing the source to perform as if connected to the display, even when it is switched away from it. (For more information on EDID, see “EDID Modes” on page 15.)

NOTE: If power is recycled to the display, or if a new display is connected, the

source may need to be rebooted to read the new EDID.

BVideo output connector — Connect a DVI-D output to this female DVI-I connector.

•If automatic EDID mode is enabled, the EDID information is read from the connected output device via this connector and is written to memory on each input whenever a display is powered on and connected this port.

•If user-assigned mode is in effect, the information in the assigned EDID file is loaded into memory when a display is connected and powered on.

NOTE: The EDID information is also read and stored whenever power is recycled to

the connected output device or when the output device is replaced.

SW DVI Plus Series • Installation

68-1316-02 specifications

The Extron Electronic 68-1316-02 is a versatile, professional-grade component designed for seamless integration into various audio-visual systems. Designed primarily for the educational and corporate environments, this device offers a range of features that enhance user experience and operational reliability.

One of the main features of the Extron 68-1316-02 is its robust connectivity options. Equipped with multiple input and output configurations, it supports a wide range of devices including computers, projectors, and displays. This flexibility ensures that various audio and video sources can be connected effortlessly, allowing for an efficient and dynamic setup.

The device utilizes Extron's renowned signal processing technology, which provides superior signal integrity and quality. This technology minimizes signal degradation, ensuring that high-definition images and clear audio are delivered consistently. Additionally, the unit supports resolutions up to 4K, making it suitable for modern high-resolution display systems.

Another characteristic that sets the Extron 68-1316-02 apart is its intuitive user interface. The device features a straightforward control panel that allows users to navigate through settings and options easily. This user-centric design ensures that even individuals with minimal technical expertise can operate the system effectively.

Moreover, the Extron 68-1316-02 includes advanced features such as EDID (Extended Display Identification Data) management, which optimizes the compatibility between the connected sources and displays. This reduces the occurrence of display issues, contributing to a smoother operation in environments where multiple devices are utilized.

The device also boasts a range of mounting options, whether ensuring it fits seamlessly within a rack or being wall-mounted in a conference room. Its compact design allows for flexible placement in various settings without compromising on performance.

Further enhancing its appeal, the Extron 68-1316-02 comes with comprehensive technical support and documentation, which ensures that users can maximize the device's potential.

In conclusion, the Extron Electronic 68-1316-02 is a highly capable component tailored for the demands of contemporary audiovisual environments. With its excellent connectivity, superior signal processing technology, and user-friendly features, it stands out as a reliable solution for educational and corporate applications alike, facilitating enhanced communication and collaboration.