Extron electronic 68-1316-02 manual Back of the rack mounting

Page 42

1U Universal Rack Shelf

1/2 Rack Width Front False

Faceplate

Front false faceplate uses 2 screws.

Use 2 mounting holes on opposite corners.

(2)4-40 x 3/16" Screws

Figure 34. Mounting an SW DVI Plus Two-input or Four-input Switcher on a Standard 9.5-inch Deep Rack Shelf

Back of the rack mounting

The SW2 DVI Plus and the SW4 DVI Plus can also be mounted vertically to the front or rear rack supports, using the optional MBB 100 Back of the Rack Mounting Kit (part number 70-367-01) as follows:

1.If rubber feet were previously attached to the bottom of the unit, remove them.

2.Remove the two screws from each side of the switcher. Retain the screws for possible later reassembly.

3.Attach the brackets to the sides of the unit, using the longer screws included in the mounting kit.

Figure 35. Attaching the Back of the Rack Mounting Brackets

4.Mount the switcher to the rack support, using the two included rack screws.

SW DVI Plus Series • Reference Information 36

Image 42

Contents DVI Switchers SW DVI Plus SeriesSafety Instructions English FCC Class a Notice Software Commands Conventions Used in this GuideNotifications Contents SW DVI Plus Series Contents Introduction About this GuideAbout the SW DVI Plus Series Features Application Diagrams Connection Diagram for an SW4 DVI Plus SwitcherInstallation Installation OverviewRear Panel Features SW2 DVI Plus Rear PanelSW6 DVI a Plus Rear Panel Wiring the Power Connector Wiring the Audio Connectors SW DVI a Plus Models Audio InputAll Other Models Remote/Auto-SW Connector Wiring for RS-232 ControlSW2 and SW4 DVI Plus RS-232 Connector Audio OutputEnabling Auto-input Switching SW2/SW4 DVI Plus Non-audio ModelsAll Other Models Remote/Auto-SW Connector with Jumper Front Panel Features OperationPowering On the Switcher OperationsSelecting an Input Using the Optional IR 102 Remote Control Remote control buttonsLocking IR remote access Automatic mode Enabling Front Panel Lockout Executive ModeSetting Equalization for Input Sources Edid ModesNative Resolution Refresh Rate User-assigned Edid modeChanging the Edid mode 1024 x 768 defaultResetting Host-to-switcher Communications Remote Configuration ControlUsing Simple Instruction Set SIS Commands Switcher-initiated MessagesError Responses Using the Command and Response TableSymbol Definitions Input Video Signal Sensing Command and Response Table for SIS CommandsInput Selection Mode Video Output MutingFront Panel Lockout Executive Mode Disable IR Receiver from Front PanelReset Upload FirmwareUniversal Switcher Control Program Downloading and Installing the Software from the WebInstalling the Software from the DVD Starting the Program Software Button on the DVD WindowUpdating Firmware Using Firmware Loader Using the Help SystemDownloading and Installing Firmware Loader Downloading the SW DVI Plus Firmware Firmware Loader Download LinkLoading the Firmware to the Switcher Connection Method Menu on the Add Device WindowOpen Window for Firmware File Selection Firmware Loader Screen with an SW DVI Plus Added Firmware Upload in Progress Specifications Reference InformationControl/remote switcher Audio outputGeneral EMI/EMC Included Parts AccessoriesPart Numbers Cables and AdaptersRack mounting Mounting the SW DVI Plus SwitcherTabletop use UL rack mounting guidelinesBack of the rack mounting Rack mounting the SW6 DVI Plus and SW8 DVI Plus Mounting an SW DVI Plus to a Back of the Rack SupportFurniture Mounting SW2 and SW4 DVI Plus Only Extron Warranty

68-1316-02 specifications

The Extron Electronic 68-1316-02 is a versatile, professional-grade component designed for seamless integration into various audio-visual systems. Designed primarily for the educational and corporate environments, this device offers a range of features that enhance user experience and operational reliability.

One of the main features of the Extron 68-1316-02 is its robust connectivity options. Equipped with multiple input and output configurations, it supports a wide range of devices including computers, projectors, and displays. This flexibility ensures that various audio and video sources can be connected effortlessly, allowing for an efficient and dynamic setup.

The device utilizes Extron's renowned signal processing technology, which provides superior signal integrity and quality. This technology minimizes signal degradation, ensuring that high-definition images and clear audio are delivered consistently. Additionally, the unit supports resolutions up to 4K, making it suitable for modern high-resolution display systems.

Another characteristic that sets the Extron 68-1316-02 apart is its intuitive user interface. The device features a straightforward control panel that allows users to navigate through settings and options easily. This user-centric design ensures that even individuals with minimal technical expertise can operate the system effectively.

Moreover, the Extron 68-1316-02 includes advanced features such as EDID (Extended Display Identification Data) management, which optimizes the compatibility between the connected sources and displays. This reduces the occurrence of display issues, contributing to a smoother operation in environments where multiple devices are utilized.

The device also boasts a range of mounting options, whether ensuring it fits seamlessly within a rack or being wall-mounted in a conference room. Its compact design allows for flexible placement in various settings without compromising on performance.

Further enhancing its appeal, the Extron 68-1316-02 comes with comprehensive technical support and documentation, which ensures that users can maximize the device's potential.

In conclusion, the Extron Electronic 68-1316-02 is a highly capable component tailored for the demands of contemporary audiovisual environments. With its excellent connectivity, superior signal processing technology, and user-friendly features, it stands out as a reliable solution for educational and corporate applications alike, facilitating enhanced communication and collaboration.