Operations, Powering On the Switcher | Extron electronic 68-1316-02

AAuto Switch Active LED — This LED lights when auto-input switching is enabled. (See

“Enabling Auto-input Switching” in the “Installation” section for the procedure to set up auto-input switching.)

BIR receiver port — This sensor detects IR signals from the optional IR 102 remote control (see “Using the Optional IR 102 Remote Control” on page 14 for more information).

CInput Selection buttons and LEDs — Press these buttons to select inputs 1 through

2, 4, 6, or 8, depending on your model. The LED at the right of each button lights when the corresponding input is selected. (These buttons are disabled if auto-input switching is in effect; however, the LEDs continue to light to indicate the selected input.)

DInput EQ DIP switches — These DIP switches (one for each input) set the equalization for the corresponding input (see “Setting Equalization for Input Sources” on page 15 for more information).

ESignal Presence LEDs — Each of these LEDs lights when a signal is present on the corresponding input.

Operations

Powering On the Switcher

Follow these steps to power on the SW DVI Plus:

1.Connect all input devices and the output to the switcher rear panel connectors (see

“Rear Panel Features” in the “Installation” section for information on the rear panel connections).

2.Power on the output device.

3.Plug the power supply into the 2-pole captive screw power connector on the rear panel.

•The unit performs a self-test, during which the front panel Auto Switch and Input

LEDs each blink once in sequence from left to right. When the self-test completes, the LED for the most recently selected input remains lit.

•The switcher reads the available EDID information from either the connected output device or the user specifications and writes it to memory on each input.

NOTE: The EDID is also read and stored again whenever power is recycled

to the display device or the device is replaced. You must reboot your

computer and other input devices for them to read the new EDID.

4.Power on the input devices.

Selecting an Input

To switch an input to the output, press the desired input button on the front panel (ensure that auto-input switching is not enabled). The LED corresponding to the selected input button lights.

•To determine the current configuration, check the front panel input LEDs. The one that is lit indicates the selected input. The LED remains lit until a new input is selected.

•Only one input can be switched to the output at a time.

•When only audio is selected for an input via SIS command (audio breakaway), the LED for the selected input blinks (see the “Select audio input only” command in the Command and Response Table for SIS commands,”Remote Configuration and Control” section).

SW DVI Plus Series • Operation 13

68-1316-02 specifications

The Extron Electronic 68-1316-02 is a versatile, professional-grade component designed for seamless integration into various audio-visual systems. Designed primarily for the educational and corporate environments, this device offers a range of features that enhance user experience and operational reliability.

One of the main features of the Extron 68-1316-02 is its robust connectivity options. Equipped with multiple input and output configurations, it supports a wide range of devices including computers, projectors, and displays. This flexibility ensures that various audio and video sources can be connected effortlessly, allowing for an efficient and dynamic setup.

The device utilizes Extron's renowned signal processing technology, which provides superior signal integrity and quality. This technology minimizes signal degradation, ensuring that high-definition images and clear audio are delivered consistently. Additionally, the unit supports resolutions up to 4K, making it suitable for modern high-resolution display systems.

Another characteristic that sets the Extron 68-1316-02 apart is its intuitive user interface. The device features a straightforward control panel that allows users to navigate through settings and options easily. This user-centric design ensures that even individuals with minimal technical expertise can operate the system effectively.

Moreover, the Extron 68-1316-02 includes advanced features such as EDID (Extended Display Identification Data) management, which optimizes the compatibility between the connected sources and displays. This reduces the occurrence of display issues, contributing to a smoother operation in environments where multiple devices are utilized.

The device also boasts a range of mounting options, whether ensuring it fits seamlessly within a rack or being wall-mounted in a conference room. Its compact design allows for flexible placement in various settings without compromising on performance.

Further enhancing its appeal, the Extron 68-1316-02 comes with comprehensive technical support and documentation, which ensures that users can maximize the device's potential.

In conclusion, the Extron Electronic 68-1316-02 is a highly capable component tailored for the demands of contemporary audiovisual environments. With its excellent connectivity, superior signal processing technology, and user-friendly features, it stands out as a reliable solution for educational and corporate applications alike, facilitating enhanced communication and collaboration.