Extron electronic TPS150 Volume adjustment, Full system reset, Receiver reset, Output volume

Page 25

Press the Projector Power button on the transmitter to issue the projector on or off command. When you push the button, the following occurs:

•If no command has been transmitted since transmitter power was applied, or if the power off command was the last command transmitted:









The transmitter sends the power on string to the receiver on the TP link.

The transmitter lights its Projector Power LED.

The transmitter starts its power off timout function (if enabled).

The receiver outputs the received serial string on its RS-232 port.

Some projectors use the same command for power on and power off. If the same code is specified for on and off, the Projector Power LED blinks for each button push.

•If the power on command was the last command transmitted:







The transmitter sends the power off string to the receiver on the TP link.

The transmitter turns off its Projector Power LED.

The receiver outputs the received serial string on its RS-232 port.

The same sequence of events occurs when the projector power timeout function (if enabled) expires.

Volume adjustment

Output volume —

Press and release the Volume up () or Volume down () button to increase or decrease the output volume by 1 dB per button push or press and hold the button to ramp the output volume up or down.

Input audio level —

1.

Press and hold the desired Input Select button.

2.

While you continue to hold the Input Select button, press and release the

 

Volume up ( ) or Volume down ( ) button to increase or decrease the

 

selected input’s volume or press and hold the button to ramp the selected

 

input’s volume up or down.

3.

Release the Input Select button.

Full system reset

To restore the I/O configurations, projector codes, volume levels, and serial setup to the default setting, press and hold the transmitter’s Volume up () and Volume down () buttons while you apply power to the transmitter. Continue to hold the Volume buttons until the transmitter LEDs stop changing and then release the Volume buttons.

Receiver reset

To reset a TPR150 receiver to its default settings, disconnect TPT150 transmitter power for 10 seconds or more.

TPS150 Switching and Transmission System • Operation

3-5

Page 24 Page 26
Image 25
Page 24 Page 26
Contents TPS150 Precautions Inputs 1 and 2 Connect two RGB video sources TPS150 Switching and Transmission System Quick Start QS-1Inputs 3 Volume and buttons Quick Start TPS150 Switching and Transmission SystemQS-2 TPS150 Switching and Transmission System Quick Start Output 1 Connect aTable of Contents Table of Contents, cont’d One TPS150 Switching and Transmission System Introduction About the TPT150 switching transmitterIntroductiontroduction, cont’d About this ManualSerial RS-232 commands on one male DB9 connector Component video Y, R-Y, B-Y on three female RCA connectorsAbout the TPR150 receiver Introduction, cont’d FeaturesTP Cable Advantages Transmission distanceTPS150 Switching and Transmission System Introduction Introduction, cont’d Two Mounting the Transmitter and Receiver Installationstallation, cont’dRack mounting the transmitter Projector mounting the receiver Projector mounting the receiverCabling and Rear Panel Views Installation, cont’dTransmitter connections Video and audio input connectionsTP and audio output connections Remote control connectionsReceiver connections Power connectionUTP Link Input connection Serial connection Video output connectionsRJ-45 TP Cable TerminationThree Transmitter controls and indicators Controls and IndicatorsTPS150 Switching and Transmission System Operation Operationeration, cont’dTPR150 receiver front panel Receiver controls and indicatorsProjector power PowerOperation, cont’d OperationsFull system reset Volume adjustmentReceiver reset Output volumeOptimizing the Video General checks TroubleshootingProblem Possible cause Solution No image appears Specific problemsDistorted image AppearsFour SerialCommunicationsunications, cont’d Installing the softwareICS100 Windows-Based Control Program System requirementsICS100 program window and connected message Establishing communications with the programAgain Serial Communications, cont’dConnected window Using the software to configure the serial port settings For each input or projector code to be programmed Using the software to program the input and projector codesCode entry Ascii code Window appears figure Using the software to operate the transmission systemButton mutes and unmutes the audio output Using the help systemCommand and response structure Serial CommandsCommunication protocols Addressing the transmitterSymbols Using the command/response tableR0addressecho of the command sent R1addressecho of the command sentSpaces between bytes are not allowed Addressing Command Ascii Command Response Additional descriptionInput audio level Response Additional description CommandFront panel lockout Serial Communications, cont’d AAppendix a Reference Information SpecificationsSync Control projector TPR only Reference Information, cont’dAccessory Part number Optional accessoriesPart Numbers Included partsReference Information, cont’d Asia Japan FCC Class a Notice Extron’s WarrantyExtron Electronics, USA
Related manuals
Manual 52 pages 17.77 Kb

TPS150 specifications

The Extron TPS150 is a highly regarded touch panel system designed for professional AV environments, providing an intuitive interface for controlling various audio and video components. This device is part of Extron's popular TouchLink Pro series, which is known for its robustness and versatility in managing classroom and conference room technology.

One of the standout features of the TPS150 is its high-resolution capacitive touch screen, which measures at 15 inches. This screen delivers vibrant colors and exceptional clarity, ensuring that users can easily interact with the device even in well-lit environments. The touch panel's interface is fully customizable, allowing users to create a layout tailored to their specific needs. This customization can include the addition of buttons, sliders, and dynamic graphics that make navigation seamless and user-friendly.

In terms of connectivity, the TPS150 supports Ethernet communication, which enables easy integration with networked AV systems. This feature allows for remote access and control, making it easier for IT professionals to monitor and manage AV devices from a centralized location. Additionally, the TPS150 is compatible with various Extron control systems, providing a robust platform for managing complex multimedia setups.

The device also incorporates advanced security features, ensuring that sensitive system controls are protected from unauthorized access. Administrators can establish user permissions and authentication processes to maintain control over the AV environment, which is particularly important in corporate and educational settings.

Moreover, the TPS150 supports Extron's global configurator software, which simplifies the setup process and allows for easy programming of touch panel interfaces. Users can design custom layouts quickly and efficiently, and the software also provides an extensive library of drivers for popular AV equipment, enhancing compatibility and functionality.

With its elegant design, high-quality components, and customizable interface, the Extron TPS150 touch panel offers an effective solution for AV control. Whether used in educational, corporate, or professional environments, it empowers users to streamline their audiovisual experiences and maintain effective control over their technology, ensuring successful presentations and meetings.
Top Page Image Contents