Gigabyte GA-M52S-S3P Center/Subwoofer Speaker Out Jack Orange, Rear Speaker Out Jack Black

Page 19

Center/Subwoofer Speaker Out Jack (Orange)

Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio configuration.

Rear Speaker Out Jack (Black)

Use this audio jack to connect rear speakers in a 4/5.1/7.1-channel audio configuration.

Side Speaker Out Jack (Gray)

Use this audio jack to connect side speakers in a 7.1-channel audio configuration.

Line In Jack (Blue)

The default line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out Jack (Green)

The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to connect front speakers in a 4/5.1/7.1-channel audio configuration.

Mic In Jack (Pink)

The default Mic in jack. Microphones must be connected to this jack.

In addition to the default speakers settings, the ~ audio jacks can be reconfigured to perform different functions via the audio software. Only microphones still MUST be connected to the default Mic in jack ( ). Refer to the instructions on setting up a 2/4/5.1/ 7.1-channel audio configuration in Chapter 5, "Configuring 2/4/5.1/7.1-Channel Audio."

English

- 19 -

Hardware Installation

Image 19

Contents GA-M52S-S3P Motherboard Identifying Your Motherboard Revision CopyrightDisclaimer Documentation ClassificationsTable of Contents Drivers Installation Box Contents GA-M52S-S3P Motherboard Layout Block Diagram Installation Precautions Hardware InstallationUSB Product Specifications4 Mbit flash Installing the CPU Installing the CPU and CPU CoolerCPU Socket Locking Lever Installing the CPU Cooler Dual Channel Memory Configuration Installing the MemoryInstalling a Memory Installing an Expansion Card Back Panel Connectors Line In Jack Blue Center/Subwoofer Speaker Out Jack OrangeRear Speaker Out Jack Black Side Speaker Out Jack GrayPwrled Clrcmos Battery Internal ConnectorsGND CPUFAN/SYSFAN Fan Headers FDD Floppy Disk Drive ConnectorSATAII0/1/2/3 Sata 3Gb/s Connectors IDE IDE ConnectorBattery Pwrled System Power LED HeaderFpanel Front Panel Header Faudio Front Panel Audio Header Cdin CD In ConnectorSpdifo S/PDIF Out Header Spdifi S/PDIF In HeaderCI Chassis Intrusion Header FUSB1/FUSB2/FUSB3 USB Headers, YellowClrcmos Clearing Cmos Jumper English Chapter Bios Setup Startup Screen Logo Screen DefaultPost Screen Bios Setup Program Function Keys Sample Bios Version FAcMain Menu „ PnP/PCI Configurations „ Standard Cmos Features„ Advanced Bios Features „ Power Management SetupIDE Channel 2/3 Master/Slave DateTime IDE Channel 0 Master/SlaveMemory Floppy 3 Mode SupportDrive a Halt onHDD S.M.A.R.T. Capability Hard Disk Boot PriorityFirst/Second/Third Boot Device Password CheckFull Screen Logo Show Away ModeInit Display First Integrated Peripherals NV Sata Pri-Master RAID IDE DMA transfer accessIDE Prefetch Mode Onchip Sata Mode nVIDIA nForce 520 chipsetWhen No LAN Cable Is Attached Smart LAN LAN Cable Diagnostic FunctionOnboard Serial Port Onboard LAN Boot ROMParallel Port Mode ECP Mode Use DMAModem Ring On PME Event Wake UpPower On By Keyboard Power-On by AlarmHpet Mode Note Power On By MousePnP/PCI Configurations Case Opened Reset Case Open StatusCurrent System/CPU Temperature System/CPU Warning TemperatureSystem Smart FAN Control CPU Smart FAN ModeRobust Graphics Booster CPU FrequencyPcie Clock CPU Clock RatioCPU Voltage Control DDR2 Voltage ControlNormal CPU Vcore Load Optimized Defaults Load Fail-Safe DefaultsSet Supervisor/User Password Exit Without Saving Save & Exit SetupInstalling Chipset Drivers Drivers InstallationDriver CD Information Software ApplicationsContact Us Hardware InformationEnglish Before You Begin Xpress Recovery2System Requirements Installing Windows XP and Partitioning the Hard Drive Installation and ConfigurationEnglish Using the Backup Function in Xpress Recovery2 Accessing Xpress Recovery2Removing the Backup Using the Restore Function in Xpress Recovery2Exiting Xpress Recovery2 Updating the Bios with the Q-Flash Utility Bios Update UtilitiesUpdating the Bios English Installing and Using @BIOS Updating the Bios with the @BIOS UtilityOptions and Instructions Update the Bios without Using the Internet Update Function EasyTune 5 Interface Button Information Table EasyTuneWindows Vista ReadyBoost Installing Sata hard drives in your computer Configuring Sata Hard DrivesConfiguring the Onboard Sata Controller To configure Sata hard drives, follow the steps belowConfiguring Sata controller mode in Bios Setup Configuring RAID set in RAID Bios YES BBS Making a Sata RAID/AHCI Driver Diskette Required for Ahci and RAID ModeInstalling Windows XP Installing the Sata RAID/AHCI Driver and Operating SystemSelect Nvidia nForce Storage Controller and press Enter Enter= Continue R=Repair F3=Exit Installing Windows Vista English Configuring 2/4/5.1/7.1-Channel Audio Configuring Audio Input and OutputConfiguring Speakers Configuring AC97 Audio Configuring Sound EffectInstalling the S/PDIF In Cable Installing the S/PDIF In Cable OptionalPdif Pdif Out Configuring S/PDIF outConneting a S/PDIF out Cable Configuring Microphone Recording English Recording the Sound Using the Sound RecorderPlaying the Sound Frequently Asked Questions TroubleshootingStart Troubleshooting ProcedureEND English English English English Taiwan Headquarters Contact UsPoland Ukraine Romania Serbia & Montenegro Gigabyte Global Service System