Gigabyte GA-M52S-S3P user manual English

English

Step 4:

Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should see the new BIOS version is present on the POST screen.

Step 5:

During the POST, press <Delete> to enter BIOS Setup. Select Load Optimized Defaults and press <Enter> to load BIOS defaults. System will re-detect all peripherals devices after a BIOS update, so we recommend that you reload BIOS defaults.

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software

`	Standard CMOS Features	Load Fail-Safe Defaults
`	Advanced BIOS Features	Load Optimized Defaults
`	Integrated Peripherals	Set Supervisor Password
`	Power Management Setup	Set User Password
		Load Optimized Defaults (Y/N)? Y
`	PnP/PCI Configurations	Save & Exit Setup
		Exit Without Saving
`	PC Health Status
`	MB Intelligent Tweaker(M.I.T.)
Esc: Quit		KLJI: Select Item
F8: Q-Flash		F10: Save & Exit Setup
		Load Optimized Defaults

Press <Y> to load BIOS defaults

Step 6:

Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The procedure is complete after the system restarts.

GA-M52S-S3P Motherboard - 64 -