HDD S.M.A.R.T. Capability
This feature allows your hard disk to report read/write errors and to issue warnings when third- party hardware monitor utility is installed.
Enabled | Enable HDD S.M.A.R.T. capability. |
Disabled | Disable HDD S.M.A.R.T. capability. (Default value) |
CPU Hyper-Threading (Note)
Enabled | Enable CPU Hyper Threading Feature. Please note that this feature is only |
| working for operating system with multi processors mode supported. |
| (Default value) |
Disabled | Disable CPU Hyper Threading. |
Limit CPUID Max. to 3 (Note)
Enabled | Limit CPUID Maximum value to 3 when use older OS like NT4. |
Disabled | Disable CPUID Limit for windows XP. (Default value) |
No-Execute Memory Protect(Note)
Enabled | Enable |
Disabled | Disable |
CPU Enhanced Halt (C1E) (Note)
Enabled | Enable CPU Enhanced Halt (C1E) function. (Default value) |
Disabled | Disable CPU Enhanced Halt (C1E) function. |
CPU Thermal Monitor 2 (TM2) (Note)
Enabled | Enable CPU Thermal Monitor 2 (TM2) function. (Default value) |
Disabled | Disable CPU Thermal Monitor 2 (TM2) function. |
CPU EIST Function (Note)
Enabled | Enable CPU EIST function. (Default value) |
Disabled | Disable EIST function. |
Virtualization Technology (Note)
Enabled | Enable Virtualization Technology. (Default value) |
Disabled | Disable this function. |
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you install a PCI card and a PCI Express VGA card on the motherboard.
PEG | Set Init display first to PCI Express VGA card. |
PCI | Set Init display first to PCI. (Default value) |
Onboard | Set Init display first to Onboard VGA. |
Onboard VGA
Enable If No Ext PEG
Output from the onboard GPU when no PCI Express VGA card is installed. (Default value)
Always Enable
Always output from the onboard GPU.
On-Chip Frame Buffer Size
1MB | Set |
|
8MB | Set |
|
(Note) This item will show up when you install a processor which supports this function. | ||
|
|
|
| - 35 - | BIOS Setup |
English