Gigabyte GA-965GM-S2, GA-965GM-DS2 user manual RDD0 Jraid

6.Confirm Creation: After all of the items are configured, the selection bar automatically jumps to the Confirm Creation item. When prompted to confirm your selections (Figure 9), press Y to confirm or N to abort.

GIGA-BYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS V1.06.53

[ Create New RAID ] [ Hard Disk Drive List ]

Name:	JRAID		Mode Name		Available	Type/Status
Level:	0-Stripe		HDD0:	ST3120026AS	120 GB	Non-RAID
Disks:	Select Disk		HDD1:	ST3120026AS	120 GB	Non-RAID
Block:	128KB
Size:	240GB
Confirm Creation
[ RAID Disk Drive List ]			[ Help ]
			Create RAID on the select HDD(Y/N)?Y
				CONFIRM RAID CREATION
			ALL DATA ON THE SELECTED HARD DISK
			WILL BE LOST WHEN EXIT WITH SAVING
[ ]-Switch Unit		[DEL,BS]-Delete Number		[ENTER]-Next	[ESC]-Abort

Figure 9

When finished, the new RAID array will be displayed in the RAID Disk Drive List block (Figure 10).

GIGA-BYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS V1.06.53

[ Main Menu ]	[ Hard Disk Drive List ]
Create RAID Disk Drive	Mode Name		Capacity	Type/Status
Delete RAID Disk Drive	HDD0: ST3120026AS		120 GB	RAID Inside
Revert HDD to Non-RAID	HDD1: ST3120026AS		120 GB	RAID Inside
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name	RAID Level	Capacity Status	Members(HDDx)
RDD0: JRAID	0-Stripe	240 GB Normal	01

[ TAB]-Switch Window [ ]-Select RAID [ENTER]-Action [ESC]-Exit

Figure 10

English

- 69 - Appendix