)OnBoard Parallel port
0This feature allows you to select from a given set of parameters if the parallel port uses the onboard I/O controller.
378/IRQ7 | Enable On Board LPT portandaddressis378.(DefaultValue) |
278/IRQ5 | Enable On Board LPT port and address is 278. |
3BC/IRQ7 | Enable On Board LPT port and address is 3BC. |
)Parallel Port Mode
0This feature allows you to connect with an advanced print via the port mode it supports.
SPP | UsingParallel portasStandardParallelPort.(DefaultValue) |
EPP | UsingParallelportasEnhancedParallelPort. |
ECP | UsingParallelportasExtendedCapabilitiesPort. |
ECP+EPP | Using Parallel port as ECP & EPP mode. |
)ECP Mode Use DMA(When Parallel Port Mode is set [ECP or ECP+EPP])
3 | Use DMA 3 for ECP mode. (Default value) |
1 | Use DMA 1 for ECP mode. |
)
Disabled | Disabledthisfunction. |
201 | Enabled Game Port and Addressis 201. (Default Value) |
209 | Enabled Game Port and Address is 209. |
)
Disabled | Disabledthisfunction. |
300 | Enabled Midi Port and Address is 300. |
330 | Enabled Midi Port and Address is 330.(Default Value) |
)
5 | MidiPortuseIRQ5. |
10 | Midi Port use IRQ 10. (DefaultValue) |
English
BIOS Setup |