English
b. Dual BIOS /
Dual BIOS /
(C) 2001,
Wide Range Protection | :Disabled |
Halt On BIOS Defects | :Disabled |
Auto Recovery | :Enabled |
Boot From | :Main BIOS |
BIOS Recovery | :Main to Backup |
|
|
F3: Load Default | F5:Start BIOS Recovery |
F7: Save And Restart | F9:Exit Without Saving |
F8: Update BIOS from disk | F10:Recovery from Disk |
Use <Space> key to toggle setup |
|
c.Dual BIOS Item explanation:
Wide Range Protection: Disabled(Default), Enabled
Status 1:
If any failure (ex. Update ESCD failure, checksum error or reset…) occurs in the Main BIOS , just before the Operating System is loaded and after the power is on, and that the Wide Range Protection is set to “Enable”, the PC will boot from Backup BIOS automatically.
Status 2:
If the ROM BIOS on peripherals cards(ex. SCSI Cards, LAN Cards,..) emits signals to request restart of the system after the user make any alteration on it, the boot up BIOS will not be changed to the Backup BIOS.