English
)On-Chip Primary PCI IDE
0When enabled, allows you to use the onboard primary PCI IDE. If a hard disk controller card is used, set at Disabled.
Enabled | Enable onboard 1st channel IDE port. (Default value) |
Disabled | Disable onboard 1st channel IDE port. |
)On-Chip Secondary PCI IDE
0When enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card is used, set at Disabled.
Enabled | Enable onboard 2nd channel IDE port. (Default value) |
Disabled | Disable onboard 2nd channel IDE port. |
)IDE1 Conductor Cable
Auto | W illbeautomaticallydetectedbyBIOS(DefaultValue) |
ATA66/100 | Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable |
| iscompatiblewith ATA66/100) |
ATA33 | Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and cable is |
| compatiblewith ATA33) |
)IDE2 Conductor Cable
Auto | W illbeautomaticallydetectedbyBIOS(DefaultValue) |
ATA66/100 | Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable |
| iscompatiblewith ATA66/100) |
ATA33 | Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and cable is |
| compatiblewith ATA33). |
)USB Controller
0Disable this option if you are not using the onboard USB feature.
Enabled | Enabled USB Controller. (Default value) |
Disabled | Disabled USB Controller. |
)USB Keyboard Support
0When a USB keyboard is installed, please set at Enabled.
Enabled | Enabled USB Keyboard Support. | |
Disabled | Disabled USB Keyboard Support. (Defaultvalue) | |
|
| |