Gigabyte AGP 4X(1.5V) manual Introduction

Chapter 1 Introduction

Features Summary

Form Factor	30.5cm x 24.4cm ATX size form factor, 4 layers PCB.
Motherboard	GA-8PE667 Series Motherboard:
	GA-8PE667 Ultra2 and GA-8PE667 Pro
CPU	Socket 478 for Intel® Micro FC-PGA2 Pentium® 4 processor
	Intel Pentium®4 533MHz/400MHz FSB
	Support Intel ® Pentium ® 4 (Northwood, 0.13 m) processor
	Support Intel ® Pentium ® 4 Processor with HT Technology
	2nd cache depend on CPU
Chipset	Chipset 845PE HOST/AGP/Controller
	ICH4 I/O Controller Hub
Memory	3	184-pin DDR DIMM sockets
	Supports DDR333/DDR266 DDR DIMM
	Supports up to 2GB DRAM (Max)
	Supports only 2.5V DDR DIMM
I/O Control	ITE8712
Slots	1	CNR(Communication and Networking Riser) Slot **
	1 AGP slot 4X (1.5V only) device support
	6	PCI slot supports 33MHz & PCI 2.2 compliant
On-Board IDE	2	IDE controllers on the Intel ICH4 PCI chipset
	provides IDE HDD/CD-ROM (IDE1, IDE2) with PIO, Bus Master
	(Ultra DMA33/ATA66/ATA100) operation modes.
	IDE3 and IDE4 Compatible with RAID,Ultra ATA133/100.**
On-Board Peripherals	1	Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M
	and 2.88M bytes.
	1	Parallel port supports Normal/EPP/ECP mode
	2 Serial ports (COMA & COMB)
	6 USB 2.0/1.1 (2 port rear,4 ports by cable)
	1	IrDA connector for IR/CIR
	1	Front Audio connector

English

* For GA-8PE667 Pro Only ** For GA-8PE667 Ultra2 Only

to be continued......

Due to (Intel 845PE/GE/GV) chipset architecture limitation, DDR 333 memory module is only supported when using FSB 533 Pentium 4 processor. A FSB 400 Pentium 4 processor will only support DDR 266 memory module

- 5 - Introduction