Gigabyte 5222, 5230, 5225 manual OnboardLANBootROM, Onboard Serial Port, UARTMode Select

OnboardLANBootROM(*)

This function decide whether to invoke the boot ROM of the onboard LAN chip.

Enabled	Enable Onboard LAN chip function.
Disabled	Disable this function . (Default value)

Onboard Serial Port 1

Disabled	Disable onboard Serial port 1.
3F8/IRQ4	Enable onboard Serial port 1 and address is 3F8, using IRQ4. (Default value)
2F8/IRQ3	Enable onboard Serial port 1 and address is 2F8, using IRQ3.
3E8/IRQ4	Enable onboard Serial port 1 and address is 3E8, using IRQ4.
2E8/IRQ3	Enable onboard Serial port 1 and address is 2E8, using IRQ3.
Auto	BIOS will autom atically setup the port 1 address.

Onboard Serial Port 2

Disabled	Disable onboard Serial port 2.
3F8/IRQ4	Enable onboard Serial port 2 and address is 3F8, using IRQ4.
2F8/IRQ3	Enable onboard Serial port 2 and address is 2F8, using IRQ3. (Default value)
3E8/IRQ4	Enable onboard Serial port 2 and address is 3E8, using IRQ4.
2E8/IRQ3	Enable onboard Serial port 2 and address is 2E8, using IRQ3.
Auto	BIOS will autom atically setup the port 2 address.

UARTMode Select

This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.

Normal	Set onboard I/O chip UART to Normal Mode . (Default Value)
IrDA	Set onboard I/O chip UART to IrDA Mode.
ASKIR	Set onboard I/O chip UART to ASKIR Mode.

(*)For GA-7N400E-L only.

- 43 - BIOS Setup

English

綳蘹鵖 鞢鏒 齇 蘻 蠖韙櫡曚垾陼 韗む