Gigabyte 5230, 5225, 5222 UR2DuplexMode, OnboardParallel port, ParallelPort Mode, ECPMode UseDMA

Disable onboard LPT port.

Enable onboard LPT port and address is 378, using IRQ7. (Default Value) Enable onboard LPT port and address is 278, using IRQ5.

Enable onboard LPT port and address is 3BC, using IRQ7.

English

UR2DuplexMode

This feature allows you to seclect IR m ode.

This function will available when "UART Mode Select" doesn't set at "Normal" nor "SCR".

Half	IR Function Duplex Half. (Default Value)
Full	IR Function Duplex Full.

OnboardParallel port

This feature allows you to select from a given set of parameters if the parallel port uses the onboard I/O controller.

Disabled

378/IRQ7

278/IRQ5

3BC/IRQ7

ParallelPort Mode

This feature allows you to connect with an advanced printer via the port mode it supports.

SPP	Using Parallel port as Standard Parallel Port.
EPP	Using Parallel port as Enhanced Parallel Port.
ECP	Using Parallel port as Extended Capabilities Port. (Default Value)
ECP+EPP	Using Parallel port as ECP & EPP mode.

ECPMode UseDMA

This feature allows you to select Direct Memory Access(DMA) channel if the ECP mode selected. This function will available when "Parallel Port M ode" set at ECP or ECP+EPP.

3	Set ECP M ode Use DM A to 3. (Default Value)
1	Set ECP Mode Use DM A to 1.

Game Port Address

Disabled	Disable this function.
201	Set Gam e Port Address to 201. (Default Value)
209	Set Game Port Address to 209.

GA-7N400E( -L) Motherboard - 44 -

綳蘹鵖 鞢鏒 齇 蘾 蠖韙櫡曚垾陼 韗む