Samsung DVD-V70, DVD-V80, DVD-V85 Setting the DVD-VCR Output Channel, Selecting the RF OUT Sound Mode (B/G-D/K) (Newzealand Model only), Changing the Preset Station Table VCR

Setting the DVD-VCR Output Channel
Selecting the RF OUT Sound Mode (B/G-D/K)
(Newzealand Model only)
24 25
GB GB
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
1After pressing the MENU, press the OK or ❿.
Result: The Setup menu is displayed.
2Press the corresponding  , ❷ buttons to select the Install
option.
3Press the OK or ❿ buttons to select this option.
Result: The Installmenu is displayed.
4Press the corresponding  or ❷ buttons, until the Manual
Setupoption is selected.
5Press the OK or ❿ button to select this option.
Result: The TV STATION TABLEmenu is displayed.
6Press the corresponding  or ❷ buttons, until the required preset
TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
7To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
8Press the  or ❷ buttons to select required position.
And then press OK again to swap the position.
9On completion, press the RETURN button four times to exit the
menu.
VCR
VCR
Changing the Preset Station Table VCR
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1After pressing theMENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2Press the corresponding  , ❷ buttons to select the Install
option.
3Press the OK or ❿ to select this option.
Result: The Installmenu is displayed.
4Press the  or ❷ buttons, until the VCR Output CHoption is
selected.
5Select the required output channel (CH21~CH69) by pressing the
OK or
❿ buttons (Australia:CH28 ~ CH69).
CH28 .. CH38 .. CH69
CH21 .. CH36 .. CH69
6On completion, press RETURN to exit the menu.
Then tune your television again (see page 16).
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
Install
TV System : G
VCR Output CH : CH 36
PR CH NAME
1 21
2
3
4
5
- - - -
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR RETURN
PR CH NAME
1
2
3 21
4
5
- - - -
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR RETURN
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1After pressing the MENU, press the OK or ❿.
Result: The Setup menu is displayed.
2Press the corresponding  , ❷ buttons to select the Install
option.
3Press the OK button to select this option.
Result:The Install menu is displayed.
4Press the  or ❷ buttons, until the TV System option is
selected.
5 Press the ➛ or ❿ button to select G or K.
6On completion, press RETURN to exit the menu.
G
K
Auto Setup
Manual Setup
Install
TV System : G
VCR Output CH : CH 36
Auto Setup
Manual Setup
Install
VCR Output CH : CH 38
Australia Model
Newzealand Model
Auto Setup
Manual Setup
TV System : G
VCR Output CH : CH 36
Install
Auto Setup
Manual Setup
VCR Output CH : CH 38
Install
Australia Model
Newzealand Model
CH:28
:
CH:38
:
CH:69
CH:21
:
CH:36
:
CH:69
(Australia Model)
(Newzealand Model)