Searching for a Specific Sequence

42 43
GB GB

Searching for a Specific Sequence

Intro Scan

1After pressing the SEARCH, press the corresponding
or
❷
buttons, until the Intro Scan option is selected.
2Press the OK or
❿.
3Press the
➛➛
or
❿❿
buttons depending on the direction
where your desired programme is located.
4When an Index mark is found the DVD-VCR will playback the tape
for 5 seconds, after which it will continue searching for the next
Index mark.
5If you want to watch the tape from a particular Index, simply press
❿
II
.
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the SEARCH button.
1After pressing the SEARCH, press the corresponding
or
❷
buttons, until the Intro Scan option is selected.
2Press the OK or
❿.
3Press the
➛➛
or
❿❿
buttons twice more. This will take
you directly to the start of the desired programme is located.
4These Index searches can be made forwards: (press
❿❿
) or
backwards: (press
➛➛
). (
➛➛
-20
● ●
0
● ●
+20
❿❿✌
5
To cancel an Index search simply press the
❿
II
or
■
button.
INTRO SCAN:
➛➛❿❿
INDEX SEARCH :
➛➛
- 6
22
VCR
Each time you record a cassette on this DVD-VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
➢This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the samesystem and vice versa.

Go To 0:00:00 Stop

Use this feature when you want to search for the 0:00:00 counter position
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
1After pressing the SEARCH, press the corresponding
or
❷
buttons, until the GoTo (0:00:00) option is selected.
2Press the OK or
❿
.

End Search

Use this feature when you want to search for a blank position to record a
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1After pressing the SEARCH, press the corresponding
or
❷
buttons, until the EndSearch option is selected.
2Press the OK or
❿
.
21 12
➞
etc.
Prev
Seq.
Seq. being
played
Next
Seq. etc.
OK
VCR
1