Deciding How to Connect DVD-VCR

You must take into account various factors when connecting audio or video systems:

Types of connectors available on your systems

Systems connected permanently to the DVD-VCR (satellite receiver for example) or

GB

temporarily (camcorder for example)

 

Your DVD-VCR is equipped with the following connectors.

Connector

Location

Type

Direction

Recommended Use

LINE 1

Rear

Audio/Video RCA

In/Out

Television

 

 

 

 

Other VCR

Audio output

Rear

Audio RCA

Out

Audio out (DVD only)

LINE 2

Front

LINE 2

In

Audio in

 

 

Audio/Video

 

Video in

COMPONENT

Rear

RCA

Out

COMPONENT out (DVD only)

output

 

 

 

 

S-VIDEO

Rear

S-JACK

Out

S-Video out (DVD only)

output

 

 

 

 

Digital AUDIO

Rear

Optical(DVD-V80/ DVD-V85)

Out

Digital Audio out (DVD only)

output

 

coaxial

 

 

OUT TO TV Rear

75

Out

Television

 

coaxial

 

 

 

IN FROM ANT. Rear

75

In

Aerial

 

coaxial

 

Cable television network

 

 

 

Satellite receiver

Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements are switched off.

Refer to the documentation supplied with your equipment for detailed connection instructions

12

Connecting DVD-VCR to the TV using the Coaxial Cable

To receive television programmes a signal must be received from one of the following sources:

 

An outdoor aerial

 

 

An indoor aerial

 

 

A cable television network

 

 

A satellite receiver

GB

 

Make sure that both the television and the DVD-VCR are

 

 

switched off before connecting the cables.

 

1

 

 

2

Remove the aerial or network input cable from the television.

2

Connect this cable to the 75coaxial socket marked

on the

 

rear of your DVD-VCR.

 

3

Plug the coaxial cable supplied into the TV socket on your

TV

 

DVD-VCR.

 

4

Plug the other end of the coaxial cable into the connector

 

previously used for the aerial on the television.

4

 

 

 

5

 

 

3

To obtain better quality pictures and sound on your television, you

 

can also connect your DVD-VCR to the television via the RCA

 

cable (see section below) if your television is equipped with this

 

type of connection.

 

Connecting DVD-VCR to the TV using the RCA Cable

Aerial

TV

3

2

RF coaxial cable

ou can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on the television. You thus:

Obtain better quality sound and pictures

Simplify the setting up procedure of your DVD-VCR

Regardless of the type of connection chosen, you must always connect the coaxial cable supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.

Make sure that both the television and the DVD-VCR are switched off before connecting the cables.

1Connect the coaxial cable as indicated in the above section.

2Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear of the DVD-VCR.

3Plug the other end into the appropriate connector on the television.

13

Page 7
Image 7
Samsung DVD-V85, DVD-V80, DVD-V70 Deciding How to Connect DVD-VCR, Connecting DVD-VCR to the TV using the Coaxial Cable