English
Troubleshooting
If you encounter any trouble during boot up, please follow the troubleshooting procedures.
START
T urn off the power and unplug the AC power cable, then remove all of the
Please make sure motherboard & chassis are not short ?
No
Please make sure all jumper settings (such as CPU syste bus speed, frequenc yratio, voltage and etc ) are set properly.
Yes
Check if the CPU cooling fan attached to CPU properly. ls CPU cooling fan power connected to CPU_FAN
properly?
Yes
Check if the memory install properly into the DIMM slot.
Yes
Insert the VGAcard. T hen plug in AT X power cable and turn on the system.
Yes | Please isolate |
| the short pin. |
Failure hasbeen excluded.
No | Make sure the | |
jumpersetting | ||
| ||
| are correct. |
Failure hasbeen excluded.
Plug the C PU cooling fan power
No in the CP U fan 
connector. Plug in the AC pow er connector.
Failure hasbeen excluded.
I nsert and push
No the memory 
module vertically into the DI MM slot.
Failure hasbeen excluded. 
A
- 82 - |
綳蘹鵖 鞢鏒 | 齇 | | 蠖韙櫡曚垾陼 | 韗矏 |