Gigabyte 7VM400M-RZ USB Mouse Support, On-Chip LAN Boot ROM, Onboard Serial Port, Midi Port IRQ

Page 25
Enable onboard LPT port and address is 378/IRQ7. (Default value) Enable onboard LPT port and address is 278/IRQ5.
Disable onboard LPT port.
Enable onboard LPT port and address is 3BC/IRQ7.

USB Mouse Support

Enabled

Enable USB mouse support.

Disabled

Disable USB mouse support. (Default value)

On-Chip LAN Boot ROM

This function decide whether to invoke the boot ROM of the onboard LAN chip.

Disabled

Disable this function. (Default Value)

Enabled

Enable this function.

Onboard Serial Port 1

Auto

BIOS will automatically setup the port 1 address.

3F8/IRQ4

Enable onboard Serial port 1 and address is 3F8. (Default value)

2F8/IRQ3

Enable onboard Serial port 1 and address is 2F8.

3E8/IRQ4

Enable onboard Serial port 1 and address is 3E8.

2E8/IRQ3

Enable onboard Serial port 1 and address is 2E8.

Disabled

Disable onboard Serial port 1.

Onboard Serial Port 2

Auto

BIOS will automatically setup the port 2 address.

3F8/IRQ4

Enable onboard Serial port 2 and address is 3F8.

2F8/IRQ3

Enable onboard Serial port 2 and address is 2F8. (Default value)

3E8/IRQ4

Enable onboard Serial port 2 and address is 3E8.

2E8/IRQ3

Enable onboard Serial port 2 and address is 2E8.

Disabled

Disable onboard Serial port 2.

Onboard Parallel port

This feature allows you to select from a given set of parameters if the parallel port uses the onboard I/O controller.

378/IRQ7

278/IRQ5

Disabled 3BC/IRQ7

Parallel Port Mode

SPP

Using Parallel port as Standard Parallel Port. (Default value)

EPP

Using Parallel port as Enhanced Parallel Port.

ECP

Using Parallel port as Extended Capabilities Port.

ECP+EPP

Using Parallel port as ECP & EPP mode.

Game Port Address

201

Set Game Port Address to 201. (Default value)

209

Set Game Port Address to 209.

Disabled

Disable this function.

Midi Port Address

300

Set Midi Port Address to 300.

330

Set Midi Port Address to 330.

Disabled

Disable this function. (Default value)

Midi Port IRQ

5

Set Midi Port IRQ to 5.

10

Set Midi Port IRQ to 10. (Default value)

English

- 25 -

BIOS Setup

Image 25
Contents 7VM400M-RZ Motherboard 7VM400M-RZ Preparing Your Computer Installing the motherboard to the chassisTable of Contents Introduction Features Summary7VM400M-RZ 7VM400M-RZ Motherboard LayoutEnglish Block DiagramSet System Jumper JP1 Hardware Installation ProcessStep CPU Installation Install the Central Processing Unit CPUInstall Memory Modules Install I/O Peripherals Cables Install AGP Card` MIC In jack Line Out jackCpufan CPU Fan Connector ATX ATX PowerSysfan System Fan Connector IDE1 / IDE2 IDE1 / IDE2 Connector FDD Floppy ConnectorFaudio Front Audio Connector Fpanel 2 x 10 pins ConnectorSpdif Spdif Out Connector Surcen Surround Center ConnectorCdin CD In Connector Game Game Connector Comb COM B ConnectorFUSB1 / FUSB2 Front USB Connector Clrcmos Clear Cmos BAT BatteryStatus Page Setup Menu / Option Page Setup Menu Main Menu For example Bios Ver. F5Main Menu Power Management Setup Advanced Bios FeaturesPnP/PCI Configuration Load Fail-Safe DefaultsDate Standard Cmos FeaturesTime IDE Primary Master, Slave / IDE Secondary Master, SlaveDrive a / Drive B Floppy 3 Mode Support for Japan AreaHalt on MemoryFirst / Second / Third Boot Device Advanced Bios FeaturesPassword Check Integrated Peripherals Parallel Port Mode On-Chip LAN Boot ROMUSB Mouse Support Onboard Serial PortPower Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control Load Optimized Defaults Load Fail-Safe DefaultsDimm OverVoltage Control ConfigurationsEnter Password Set Supervisor/User PasswordExit Without Saving Save & Exit SetupInstall Chipset Drivers Install DriversPictures below are shown in Windows XP Item Description Taiwan Headquarters Contact UsChina Shanghai