Gigabyte GA-M55S-S3 user manual Time, IDE Channel 0 Master/Slave, IDE Channel 2/3/4/5 Master

English

2-1	Standard CMOS Features
		CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
				Standard CMOS Features
	Date (mm:dd:yy)			Mon, Oct 30 2006		Item Help
	Time (hh:mm:ss)			9:45:15		Menu Level
	IDE Channel 0 Master			[None]
	IDE Channel 0 Slave			[None]
	IDE Channel 2 Master			[None]
	IDE Channel 3 Master			[None]
	IDE Channel 4 Master			[None]
	IDE Channel 5 Master			[None]
	Drive A			[1.44M, 3.5"]
	Drive B			[None]
	Floppy 3 Mode Support			[Disabled]
	Halt On			[All, But Keyboard]
	Base Memory			640K
	Extended Memory			511M
	: Move	Enter: Select		+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values			F6: Fail-Safe Defaults		F7: Optimized Defaults
	Date
	The date format is <week>, <month>, <day>, <year>.
	Week		The week, from Sun to Sat, determined by the BIOS and is display-only
	Month		The month, Jan. Through Dec.
	Day		The day, from 1 to 31 (or the maximum allowed in the month)
	Year		The year, from 1999 through 2098

Time

The times format in <hour> <minute> <second>. The time is calculated based on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master/Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. IDE Channel 0 Master/Slave devices setup. You can use one of three methods:

Auto	Allows BIOS to automatically detect IDE/SATA devices during POST. (Default
	value)
None	Select this if no IDE/SATA devices are used and the system will skip the
	automatic detection step and allow for faster system start up.
Manual	User can manually input the correct settings.
Access Mode	Use this to set the access mode for the hard drive. The four options are:
	CHS/LBA/Large/Auto(default:Auto)

IDE Channel 2/3/4/5 Master

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. Extended IDE Drive You can use one of the two methods:

Auto		Allows BIOS to automatically detect IDE/SATA devices during POST(default)
None		Select this if no IDE/SATA devices are used and the system will skip the
		automatic detection step and allow for faster system start up.
GA-M55S-S3	(rev. 2.0) Motherboard		- 32 -