8)PWR_LED
The PWR_LED connector is connected with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode.
| Pin No. | Definition | |
1 | 1 | MPD+ | |
2 | MPD- | ||
| |||
| 3 | MPD- |
9) BATTERY
English
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
If you want to erase CMOS...
1.Turn off the computer and unplug the power cord.
2.Gently take out the battery and put it aside for about one minute. (Or you can use a metal object to connect the positive and negative pins in the battery holder to make them short for five seconds.)
3.
4.Plug the power cord in and turn on the computer.
- 23 - | Hardware Installation |