Gigabyte GA-K8N51PVM9-RH user manual Standard Cmos Features, Time, IDE Channel 2/3/4/5 Master

Allows BIOS to automatically detect IDE/SATA devices during POST. (Default value)

Select this if no IDE/SATA devices are used and the system will skip the automatic detection step and allow for faster system start up.

User can manually input the correct settings.

Use this to set the access mode for the hard drive. The four options are: CHS/LBA/Large/Auto(default:Auto)

English

2-1	Standard CMOS Features
		CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
				Standard CMOS Features
	Date (mm:dd:yy)			Fri, Jun 23 2006		Item Help
	Time (hh:mm:ss)			22:31:24		Menu Level`
` IDE Channel 0 Master				[None]		Change the day, month,
` IDE Channel 0 Slave				[None]		year
` IDE Channel 1 Master				[None]
` IDE Channel 1 Slave				[None]		<Week>
` IDE Channel 2 Master				[None]		Sun. to Sat.
` IDE Channel 3 Master				[None]
` IDE Channel 4 Master				[None]		<Month>
` IDE Channel 5 Master				[None]		Jan. to Dec.
	Drive A			[1.44M, 3.5"]		<Day>
	Floppy 3 Mode Support			[Disabled]		1 to 31 (or maximum
	Halt On			[All, But Keyboard]		allowed in the month)
						<Year>
	Base Memory			640K		1999 to 2098
	Extended Memory			511M
	Total Memory			512M
KLJI: Move		Enter: Select		+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values			F6: Fail-Safe Defaults		F7: Optimized Defaults
	Date
	The date format is <week>, <month>, <day>, <year>.
	Week		The week, from Sun to Sat, determined by the BIOS and is display only
	Month		The month, Jan. Through Dec.
	Day		The day, from 1 to 31 (or the maximum allowed in the month)
	Year		The year, from 1999 through 2098

Time

The times format in <hour> <minute> <second>. The time is calculated based on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.

IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave devices setup. You can use one of three methods:

Auto

None

Manual

Access Mode

IDE Channel 2/3/4/5 Master

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. Extended IDE Drive You can use one of the two methods:

Auto	Allows BIOS to automatically detect IDE/SATA devices during POST(default)
None	Select this if no IDE/SATA devices are used and the system will skip the
	automatic detection step and allow for faster system start up.
GA-K8N51PVM9-RH-NV Motherboard		- 32 -