Gigabyte F_PANEL Jumper Connections for GA-K8NF-9 Network Card

10)F_PANEL (Front Panel Jumper)

Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_PANEL connector according to the pin assignment below.

20 19

English

SPEAK-

Speaker Connector

SPEAK+

			PW-		NC	RES+
Power Switch		PW+			RES-
			MSG-			HD-
Message LED/		MSG+			HD+
Power/	2			1
Sleep LED

Reset Switch

IDE Hard Disk Active LED

SPEAK (Speaker Connector)	Pin 1: VCC(+)
(Amber)	Pin 2- Pin 3: NC
	Pin 4: Data(-)
PW (Power Switch)	Open: Normal Operation
(Red)	Close: Power On/Off
MSG (Message LED/Power/Sleep LED)	Pin 1: LED anode(+)
(Yellow)	Pin 2: LED cathode(-)
RES (Reset Switch)	Open: Normal Operation
(Green)	Close: Reset Hardware System
HD (IDE Hard Disk Active LED)	Pin 1: LED anode(+)
(Blue)	Pin 2: LED cathode(-)
NC (Purple)	NC

- 23 - Hardware Installation