Gigabyte GA-K8NF-9 Onboard Serial Port, Onboard Parallel Port, Parallel Port Mode, On-Chip USB

English

Onboard Serial Port 1

Auto	BIOS will automatically setup the Serial port 1 address.
3F8/IRQ4	Enable onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3	Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4	Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3	Enable onboard Serial port 1 and address is 2E8.
Disabled	Disable onboard Serial port 1.

Onboard Parallel Port

Disabled	Disable onboard LPT port.
378/IRQ7	Enable onboard LPT port and address is 378/IRQ7. (Default value)
278/IRQ5	Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7	Enable onboard LPT port and address is 3BC/IRQ7.

Parallel Port Mode

SPP	Using Parallel port as Standard Parallel Port. (Default value)
EPP	Using Parallel port as Enhanced Parallel Port.
ECP	Using Parallel port as Extended Capabilities Port.
ECP+EPP	Using Parallel port as ECP and EPP mode.

ECP Mode Use DMA

3	Set ECP Mode Use DMA to 3. (Default value)
1	Set ECP Mode Use DMA to 1.

On-Chip USB

Disabled	Disable this function if you are not using onboard USB function.
V1.1+V2.0	Enable USB 1.1 and USB 2.0 controller. (Default value)
V1.1	Enable only USB 1.1 controller.

Legacy USB Keyboard/Storage

Enabled	Enable USB keyboard support in the MS-DOS environment.
Disabled	Disable this function. (Default value)

Legacy (DOS) USB Mouse

Enabled	Enable USB mouse support in the MS-DOS environment.
Disabled	Disable this function. (Default value)

Legacy USB storage detect

Enabled	Enable USB storage detect function. (Default value)
Disabled	Disable this function.

GA-K8NF-9(rev. 2.2) Motherboard - 36 -