Gigabyte GA-K8NF-9 user manual Time, IDE Channel 0 Master/Slave IDE Channel 1 Master/Slave

English

2-1	Standard CMOS Features
		CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
				Standard CMOS Features
	Date (mm:dd:yy)			Fri, Dec 30 2005		Item Help
	Time (hh:mm:ss)			22:31:24		Menu Level`
` IDE Channel 0 Master				[None]		Change the day, month,
` IDE Channel 0 Slave				[None]		year
` IDE Channel 1 Master				[None]
` IDE Channel 1 Slave				[None]		<Week>
` IDE Channel 2 Master				[None]		Sun. to Sat.
` IDE Channel 3 Master				[None]
` IDE Channel 4 Master				[None]		<Month>
` IDE Channel 5 Master				[None]		Jan. to Dec.
	Drive A			[1.44M, 3.5"]		<Day>
	Drive B			[None]		1 to 31 (or maximum
	Halt On			[All, But Keyboard]		allowed in the month)
	Floppy 3 Mode Support			[Disabled]		<Year>
						1999 to 2098
KLJI: Move		Enter: Select	+/-/PU/PD: Value		F10: Save	ESC: Exit	F1: General Help
		F5: Previous Values			F7: Optimized Defaults
	Date
	The date format is <week>, <month>, <day>, <year>.
	Week	The week, from Sun to Sat, determined by the BIOS and is display only
	Month	The month, Jan. Through Dec.
	Day	The day, from 1 to 31 (or the maximum allowed in the month)
	Year	The year, from 1999 through 2098

Time

The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military- time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master/Slave ; IDE Channel 1 Master/Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.

IDE Channel 0 Master/Slave ; IDE Channel 1 Master/Slave IDE devices setup. You can use one of three methods:

• Auto	Allows BIOS to automatically detect IDE devices during POST. (Default value)
• None	Select this if no IDE devices are used and the system will skip the automatic
	detection step and allow for faster system start up.
• Manual	User can manually input the correct settings.
Access Mode	Use this to set the access mode for the hard drive. The four options are:
	CHS/LBA/Large/Auto(default:Auto)
Capacity	Capacity of currectly installed hard drive.

IDE Channel 2/3/4/5 Master

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. Extended IDE Drive You can use one of the two methods:

• Auto	Allows BIOS to automatically detect IDE devices during POST(default)
• None	Select this if no IDE devices are used and the system will skip the automatic
	detection step and allow for faster system start up.
Access Mode	Use this to set the access mode for the hard drive. The two options are:
	Large/Auto(default:Auto)
GA-K8NF-9(rev. 2.2) Motherboard		- 30 -