Gigabyte GA-8S661GXMP Cpufan / Sysfan Cooler Fan Power Connector, IDE1/IDE2 IDE Connector

English

3/4) CPU_FAN / SYS_FAN (Cooler Fan Power Connector)

The cooler fan power connector supplies a +12V power voltage via a 3-pin power connector and possesses a foolproof connection design.

Most coolers are designed with color-coded power connector wires. A red power connector wire indicates a positive connection and requires a +12V power voltage. The black connector wire is the ground wire (GND).

Please remember to connect the power to the cooler to prevent system overheating and failure. Caution!

Please remember to connect the power to the CPU fan to prevent CPU overheating and failure.

1

CPU_FAN

1

SYS_FAN

Pin No.	Definition
1	GND
2	+12V
3	Sense

5)IDE1/IDE2 (IDE Connector)

An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master and the other as Slave (for information on settings, please refer to the instructions located on the IDE device).

40 39 40 39

2	1	2	1
IDE2 Connector			IDE1 Connector

GA-8S661GXMP(-C) Motherboard - 18 -