Gigabyte GA-8S661GXMP user manual Main Screen of Xpress Recovery2, Limitations, Precautions

Page 50

English

The Main Screen of Xpress Recovery2

1. RESTORE:

 

Restore the backed-up data to your hard disk.

 

(This button will not appear if there is no backup

 

file.)

 

2. BACKUP:

 

Back up data from hard disk.

 

3. REMOVE:

 

Remove previously-created backup files

 

to release disk space.

 

(This button will not appear if there is no backup

 

file.)

 

4. REBOOT:

 

Exit the main screen and restart the system.

Limitations:

1. Not compatible to Xpress Recovery.

2. For the use of Xpress Recovery2, a primary partition must be reserved.

3. Xpress Recovery2 will store the backup file at the end of the hard disk, so free space available on the hard disk for the backup file must be allocated in advance. (A minimum 4GB is recom- mended but the actual space is dependent on the size of the data to be backed up)

4. Capable of backing up hard disks installed with Windows operating systems including DOS and Windows XP/2000/NT/9x/Me.

5. USB hard disks are currently not supported.

6. Does not support RAID/AHCI (class code 0104/0106) hard disks.

7. Capable of backing up and restoring only the first physical hard disk. Hard disks detection sequence is as follows:

a. PATA IDE primary channel

b. PATA IDE secondary channel c . SATA IDE channel 1

d. SATA IDE channel 2 e. SATA IDE channel 3

f.SATA IDE channel 4

Precautions:

1.When using hard disks with more than 128G under Windows 2000, be sure to execute the EnableBigLba.exe program from the driver CD before data backup.

2.It is normal that data backup takes longer time than data restoration.

3.Xpress Recovery2 is compliant with the GPL regulations.

4.On a few motherboards based on Nvidia chipsets, BIOS update is required for Xpress Recovery2 to correctly identify RAID and SATA IDE mode. Please contact your motherboard manufacturer.

5.Xpress Recovery2 supports only PATA hard disks and not SATA hard disks on the following motherboards (As this is a BIOS-related issue, it can be solved by BIOS update)

GA-K8U

GA-K8NXP-9

 

GA-8N-SLI Royal

GA-K8U-9

GA-K8N Ultra-9

GA-8N-SLI Pro

GA-K8NXP-SLI

GA-K8NF-9 (PCB Ver. 1.0)

GA-8N-SLI

GA-K8N Ultra-SLI

GA-K8NE (PCB Ver. 1.0)

 

GA-K8N Pro-SLI

GA-K8NMF-9

 

 

GA-8S661GXMP(-C) Motherboard

- 50 -

 

Image 50
Contents GA-8S661GXMP-C GA-8S661GXMP Copyright Product Manual ClassificationTable of Contents Drivers Installation GA-8S661GXMP-C Motherboard Layout Block Diagram Page Instances of Non-Warranty Considerations Prior to InstallationInstallation Notices Preparing Your ComputerFeature Summary Installation of the CPU and Heatsink Installation of the CPUPin One Indicator Installation of the HeatsinkInstallation of Memory Installation of Expansion Cards I/O Back Panel Introduction Connectors Introduction ATX12V/ATX Power Connector Cpufan / Sysfan Cooler Fan Power Connector IDE1/IDE2 IDE ConnectorFDD FDD Connector Faudio Front Audio Panel ConnectorFpanel Front Panel Connector Cdin CD in Connector Surcen12 F1USB / F2USB Front USB Connectors Spdifio Spdif In/ OutCI Chassis Intrusion, Case Open Clrcmos Clear CmosComb Comb Connector PwrledBAT Battery English Status Page Setup Menu / Option Page Setup Menu Main MenuMain Menu For example Bios Ver. E2 „ Exit Without Saving „ Set User Password„ Save & Exit Setup IDE Channel 0 Master, Slave /IDE Channel 1 Master, Slave Standard Cmos FeaturesTime Halt on Floppy 3 Mode Support for Japan AreaDrive a / Drive B MemoryFirst / Second / Third Boot Device Advanced Bios FeaturesHard Disk Boot Priority CPU Hyper-Threading Boot Up Floppy SeekPassword Check Limit Cpuid Max. toIntegrated Peripherals ECPOnboard LAN device Parallel Port ModeECP Mode Use DMA USB ControllerModemRingOn Power Management SetupIRQ 3-7, 9-15, NMI Resume by Alarm Power On By KeyboardPower On By Mouse Power LED in S1 StatePnP/PCI Configurations PCI 1 IRQ AssignmentCase Opened Current CPU TemperaturePC Health Status Current VoltageV Vcore / DDR 2.5V / +3.3V / +12VMB Intelligent Tweaker M.I.T AGP/PCI Clock Control CPU Clock MHzDram Clock MHz AGP Clock MHzLoad Fail-Safe Defaults Load Optimized DefaultsSet Supervisor/User Password Save & Exit Setup Exit Without SavingDrivers Installation Install Chipset DriversSoftware Application Software InformationHardware Information Contact UsEnglish Unique Software Utility Xpress Recovery2 IntroductionHow to use the Xpress Recovery2 System requirementsLimitations Main Screen of Xpress Recovery2Precautions Before You Begin Bios Flash Method IntroductionMethod 1 Q-FlashTMUtility Entering the Q-FlashTMutility Exploring the Q-FlashTM / Dual Bios utility screenTask menu for Dual Bios utility Task menu for Q-Flash utilityUsing the Q-FlashTMutility StepsYou can repeat to 4 to flash the backup BIOS, too Press Y on your keyboard to save and exit Exploring the Q-FlashTMutility screen EnglishCongratulation!! You have updated Bios successfully Bios file becomes F4 after updatingMethod 2 @BIOSTM Utility Methods and stepsEnglish Channel Audio Setup 3 2 / 4 / 6 Channel Audio Function IntroductionChannel Analog Audio Output Mode Basic 6 Channel Analog Audio Output Mode English Basic & Advanced 6 Channel Analog Audio Output Mode Notes Spdif Output Device Optional Device Introduction of audio connectors Jack-Sensing IntrouctionManual setting Troubleshooting English English Contact Us Taiwan HeadquartersChina Shanghai